APEM

www.apem.com

1

New!

PBA series

Piezo switches Ø 30 mm

Distinctive features and specifications

K

Bushing diameter 30 mm (1.181)

K

Sealed to IP68 and IP69K (switches mounted on panel)

K

Easy to clean metal surface

K

Very long life expectancy

K

Ring illumination: flush or prominent ring

ENVIRONMENTAL SPECIFICATIONS

• Sealing : IP68 per IEC 60529, IP69K per DIN 40050-9

(switches mounted on panel)

• Operating temperature : -40 °C to +75 °C (-40 °F to +167 °F)

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load : 1 A 24 VAC/DC

• Switch resistance ON : 10 Ω max.

• Switch resistance OFF : 5 MΩ min.

• Life expectancy : 50 million cycles

• LED consumption : 20 mA

SEALING

IP68

SEALING

IP69K

MATERIALS

• Case : aluminum, anodized

or stainless steel 316L

• Multi-wire leads section 0,22 mm2

length 300 mm, twisted by pair

• Cable, length 300 mm, section

depending on switch model

GENERAL SPECIFICATIONS

• Operating force : 6 to 12 N

• Torque : 1.5 Nm min. - 10 Nm max

ΠOne-piece bushing

 Epoxy sealed terminals

Ž O-ring

Continuous immersion in water

IP68 test conditions

Continuous immersion in water

(1m, 24 hours)

IP69K test conditions

. Pressure : 80 - 120 bars

. Distance : 15 cm

. Temperature : 80°C ± 5°C

. Flow : 14 - 16 l/mn

. Duration : 30 seconds per position

High pressure, high temperature wash down

Note

: to maintain the ESD performance,

always add a ground washer when the

panel is made of non-conductive material

(PVC, polycarbonate).

For part numbers, see “Mounting

accessories“ on the following pages.

The company reserves the right to change specifications without notice.

SW-PBA30-1706