Personal

Computer

Monitor with

TUSB2046B

4-Port Hub

Modem

Scanner

Digital Scanner

Right Speaker

Mouse

Left Speaker

Printer with

TUSB2046B

4-Port Hub

Keyboard with

TUSB2046B

4-Port Hub

Product

Folder

Order

Now

Technical

Documents

Tools &

Software

Support &

Community

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.

TUSB2046B, TUSB2046I

SLLS413L – FEBRUARY 2000 – REVISED JUNE 2017

TUSB2046x 4-Port Hub for the Universal Serial Bus With Optional

Serial EEPROM Interface

1

(1)

JEDEC descriptor S-PQFP-G for low-profile quad flatpack

(LQFP).

1 Features

1

•

Fully Compliant With the USB Specification as a

Full-Speed Hub: TID #30220231

•

32-Pin LQFP (1) Package With a 0.8-mm Terminal

Pitch or QFN Package With a 0.5-mm Pin Pitch

•

3.3-V Low-Power ASIC Logic

•

Integrated USB Transceivers

•

State Machine Implementation Requires No

Firmware Programming

•

One Upstream Port and Four Downstream Ports

•

All Downstream Ports Support Full-Speed and

Low-Speed Operations

•

Two Power Source Modes

–

Self-Powered Mode

–

Bus-Powered Mode

•

Power Switching and Overcurrent Reporting Is

Provided Ganged or Per Port

•

Supports Suspend and Resume Operations

•

Supports Programmable Vendor ID and Product

ID With External Serial EEPROM

•

3-State EEPROM Interface Allows EEPROM

Sharing

•

Push-Pull Outputs for PWRON Eliminate the Need

for External Pullup Resistors

•

Noise Filtering on OVRCUR Provides Immunity to

Voltage Spikes

•

Package Pinout Allows 2-Layer PCB

•

Low EMI Emission Achieved by a 6-MHz Crystal

Input

•

Migrated From Proven TUSB2040 Hub

•

Lower Cost Than the TUSB2040 Hub

•

Enhanced System ESD Performance

•

No Special Driver Requirements; Works

Seamlessly With Any Operating System With USB

Stack Support

•

Supports 6-MHz Operation Through a Crystal

Input or a 48-MHz Input Clock

2 Applications

•

Computer Systems

•

Docking Stations

3 Description

The TUSB2046x is a 3.3-V CMOS hub device that

provides one upstream port and four downstream

ports in compliance with the Universal Serial Bus

(USB) specification as a full-speed hub. Because this

device is implemented with a digital state machine

instead of a microcontroller, no firmware

programming

is

required.

Fully

compliant

USB

transceivers are integrated into the ASIC for all

upstream and downstream ports. The downstream

ports support full-speed and low-speed devices by

automatically setting the slew rate according to the

speed of the device attached to the ports. The

configuration of the BUSPWR pin selects either the

bus-powered or the self-powered mode.

Configuring the GANGED input determines the power

switching and overcurrent detection modes for the

downstream ports. If GANGED is high, all PWRON

outputs switch together and if any OVRCUR is

activated, all ports transition to the power-off state. If

GANGED is low, the PWRON outputs and OVRCUR

inputs operate on a per-port basis.

Device Information(1)

PART NUMBER

PACKAGE

BODY SIZE (NOM)

TUSB2046B

TUSB2046BI

TUSB2046I

VQFN (32)

5.00 mm × 5.00 mm

LQFP (32)

7.00 mm × 7.00 mm

(1) For all available packages, see the orderable addendum at

the end of the data sheet.

USB-Tiered Configuration Example