| Electronic Components Datasheet Search |
|
USB2524 Datasheet(PDF) 14 Page - SMSC Corporation |
|
|
|||||||||||||||||||||||||||||
USB2524 Datasheet(HTML) 14 Page - SMSC Corporation |
|
14 / 57 page ![]() USB MultiSwitchTM Hub Datasheet Revision 1.91 (08-22-07) 14 SMSC USB2524 DATASHEET Assign Downstream Ports to Upstream Host Ports PRT_ASSIGN [3:0] I Port Assign Interface: Operates in either Embedded mode, or Peripheral mode. See Chapter 6, Assigning Ports for additional details. SERIAL PORT INTERFACE Serial Data/SMB Data SDA/SMBDATA IOSD12 (Serial Data)/(SMB Data) signal. Serial Clock/SMB Clock & Configuration Programming Select SCL/SMBCLK/ CFG_SEL0 IOSD12 (Serial Clock)/(SMB Clock) signal. CFG_SEL0: The logic state of this multifunction pin is internally latched on the rising edge of RESET_N (RESET_N negation), and will determine the hub configuration method as described in Table 4.2. Configuration Programming Select CFG_SEL1 I The logic state of this pin is internally latched on the rising edge of RESET_N (RESET_N negation), and will determine the hub configuration method as described in Table 4.2. Configuration Programming Select CFG_SEL2 I The logic state of this pin is internally latched on the rising edge of RESET_N (RESET_N negation), and will determine the hub configuration method as described in Table 4.2. Table 4.2 SMBus or EEPROM Interface Behavior NAME NAME NAME FUNCTION CFG_SEL2 CFG_SEL1 CFG_SEL0 SMBus or EEPROM interface behavior. 0 0 0 Internal Default Configuration PRT_ASSIGN[3:0] = Embedded Mode. Strap options on pins LED_A[4:1]_N are enabled. LED Mode = USB Mode 0 0 1 Configured as an SMBus slave for external download of user-defined descriptors. SMBus slave address is :0101100 Strap options on pins LED_A[4:1]_N are disabled LED Mode = See Chapter 8, LED Interface Description 0 1 0 Internal Default Configuration PRT_ASSIGN[3:0] = Peripheral Mode (Level Triggered) Strap options on pins LED_A[4:1]_N are enabled. No support for unassigned Ports. LED Mode = USB Mode 0 1 1 2-wire (I2C) EEPROMS are supported, LED Mode = See Chapter 8, LED Interface Description Table 4.1 Switching Hub Pin Descriptions (continued) NAME SYMBOL TYPE FUNCTION |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |