TAS5706PAPR datasheet(38/62 Pages) TI

38 / 62 page

www.ti.com

TAS5706

SLOS550A – DECEMBER 2007 – REVISED DECEMBER 2007

For the TAS5706 controller, the gain is the programmed digital gain multiplied by a scaling factor, called the

maximum modulation level. The maximum modulation level is derived from the modulation limit programmed in

the controller, which limits duty cycle to a set number of percent above 0% and below 100%. Setting the

modulation limit to 97.7% (default) limits the duty cycle between 2.3% and 97.7%.

Controller gain = digital gain

× maximum modulation level × (modulation level/digital FFS)

Digital FFS = digital input fraction of full scale

Modulation limit = 97.7%

Maximum modulation level = 2

× modulation limit – 1 = 0.954

The output signal level of the TAS5706 can now be calculated.

VRMS = digital FFS × digital gain × maximum modulation level × 13

With the modulation limit set at the default level of 97.7%, this becomes:

VRMS = digital FFS × digital gain × 12.4

(Single-ended)

VRMS = digital FFS × digital gain × 24.8

(BTL)

Example: Input = –20 dbFS; volume = 0 dB; biquads = ALL PASS; modulation index = 97.7%; mode = BTL

Output VRMS = 24.8 × 0.1 × 1 = 2.48 V

Submit Documentation Feedback

Product Folder Link(s): TAS5706

TAS5706PAPR Datasheet(PDF) 38 Page - Texas Instruments