RZSLASHT2ME datasheet(8/116 Pages) RENESAS

8 / 116 page

Table 1.8

Communication interfaces (3 of 3)

Feature

Functional description

Expanded serial peripheral interface

(xSPI)

● 2 channels

● Comply with JESD251

● Multiple slave up to 2 slaves

● Protocol mode: 1/4/8pin with SDR/DDR

1S-1S-1S, 4S-4D-4D, 8D-8D-8D

● Support OctaFlash, OctaRAM, HyperFlash and HyperRAM

● Protocol mode: 2/4pin with SDR compatible with QSPI

1S-2S-2S, 2S-2S-2S

1S-4S-4S, 4S-4S-4S

● Configurable address length

● Configurable initial access latency cycle

● Support XiP mode

● Support up to 128 MB address space each CS

● Prefetch function for burst-read with low latency

● Outstanding buffer for burst-write with high throughput

● Manual command configurable up to 4 commands

● Output clock/input strobe port timing shift

● Automatic command after released reset: up to 4 commands

● CS size can be changed

● Support on-the-fly decription

– Outstanding: 2

– Bypass area /decryption area selectable

– AES CTR mode decryption

– Support only decription read (No support encryption write)

Note 1. EtherCAT is a registered trademark of Beckhoff Automation GmbH, Germany.

Table 1.9

Analog

Feature

Functional description

12-bit A/D converter (ADC12)

● 12 bits × 2 units (unit 0: 8 channels, unit 1: 16 channels)

● 12-bit resolution

● Conversion time

0.84 µs per channel

● Operating mode

Scan mode (single scan mode, continuous scan mode, or 3 group scan mode)

Group priority control

● Sample-and-hold function

Common sample-and-hold circuit included

In addition, channel-dedicated sample-and-hold function (3 channels: in unit 0 only)

included

● Sampling variable

Sampling time can be set up for each channel

● Double trigger mode (A/D conversion data duplicated)

● Three ways to start A/D conversion

Software trigger, timer (MTU3, ELC) trigger, external trigger

● Event linking by the ELC

Temperature sensor unit (TSU)

● 1 channel

● Relative precision: ±1°C (typ)

Table 1.10

Hardware accelerator for industrial interfaces

Feature

Functional description

ΔΣ interface (DSMIF)

● 3 channels × 2 units

● Selectable 2 inputs (U/V) or 3 inputs (U/V/W)

● Up to 6 ΔΣ modulators are externally connectable

● Sinc filter can be selected as first, second or third order

● Direct error connection to POE3 and POEG

Trigonometric function unit (TFU)

Calculation of sine, cosine, arctangent, hypot_k (

x2+y2/k)

● Simultaneous calculation of sine and cosine

● Simultaneous calculation of arctangent and hypot_k

Encoder interfaces*1

● EnDat 2.2, BiSS, FA-CODER, A-format, and HIPERFACE DSL-compliant interfaces

Note 1. This applies to the devices with the encoder interfaces.

RZ/T2ME Datasheet

1. Overview

R01DS0441EJ0110 Rev.1.10

Mar 13, 2026

Page 8 of 116

RZ/T2ME Datasheet(PDF) 8 Page - Renesas Technology Corp

RZ/T2ME Datasheet(HTML) 8 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL