TLV2342, TLV2342Y, TLV2344, TLV2344Y

LinCMOS

™ LOW-VOLTAGE HIGH-SPEED

OPERATIONAL AMPLIFIERS

SLOS194 – FEBRUARY 1997

5

POST OFFICE BOX 655303

8 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±5 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±30 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

unlimited

. . . . . . . . . . . . . . . . . . . . . . . . .

Continuous total dissipation

See Dissipation Rating Table

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–40

°C to 85°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range

– 65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values, except differential voltages, are with respect to network ground.

2. Differential voltages are at the noninverting input with respect to the inverting input.

3. The output may be shorted to either supply. Temperature and /or supply voltages must be limited to ensure that the maximum

dissipation rating is not exceeded (see application selection).

DISSIPATION RATING TABLE

PACKAGE

TA ≤ 25°C

DERATING FACTOR

TA = 85°C

PACKAGE

A

POWER RATING

ABOVE TA = 25°C

A

POWER RATING

D–8

725 mW

5.8 mW/

°C

377 mW

D–14

950 mW

7.6 mW/

°C

494 mW

N

1575 mW

5.6 mW/

°C

364 mW

P

1000 mW

8.0 mW/

°C

520 mW

PW–8

525 mW

4.2 mW/

°C

273 mW

PW–14

700 mW

6.0 mW/

°C

340 mW

recommended operating conditions

MIN

MAX

UNIT

Supply voltage, VDD

2

8

V

Common mode input voltage VIC

VDD = 3 V

– 0.2

1.8

V

Common-mode input voltage, VIC

VDD = 5 V

– 0.2

3.8

V

Operating free-air temperature, TA

–40

85

°C