DAC7568C datasheet(49/58 Pages) TI

49 / 58 page

LAYOUT

DAC7568

DAC8168

DAC8568

www.ti.com ..................................................................................................................................................... SBAS430A – JANUARY 2009 – REVISED APRIL 2009

The power applied to AVDD should be well-regulated

and low noise. Switching power supplies and dc/dc

A precision analog component requires careful layout,

converters often have high-frequency glitches or

adequate bypassing, and clean, well-regulated power

spikes riding on the output voltage. In addition, digital

supplies.

components can create similar high-frequency spikes

as their internal logic switches states. This noise can

The

DAC7568,

DAC8168,

and

DAC8568

offer

easily couple into the DAC output voltage through

single-supply operation, and are often used in close

various paths between the power connections and

proximity

with

digital

logic,

microcontrollers,

analog output.

microprocessors, and digital signal processors. The

more digital logic present in the design and the higher

As with the GND connection, AVDD should be

the switching speed, the more difficult it is to keep

connected to a power-supply plane or trace that is

digital noise from appearing at the output.

separate from the connection for digital logic until

they are connected at the power-entry point. In

As a result of the single ground pin of the DAC7568,

addition, a 1

µF to 10µF capacitor and 0.1µF bypass

DAC8168,

and

DAC8568,

all

return

currents

capacitor

are

strongly

recommended.

some

(including digital and analog return currents for the

situations, additional bypassing may be required,

DAC) must flow through a single point. Ideally, GND

such as a 100

µF electrolytic capacitor or even a Pi

would be connected directly to an analog ground

filter made up of inductors and capacitors—all

plane. This plane would be separate from the ground

designed to essentially low-pass filter the supply and

connection for the digital components until they were

remove the high-frequency noise.

connected at the power-entry point of the system.

Submit Documentation Feedback

Product Folder Link(s): DAC7568 DAC8168 DAC8568

DAC7568C Datasheet(PDF) 49 Page - Texas Instruments

DAC7568C Datasheet(HTML) 49 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

Datasheet Download

Link URL