HAL810 datasheet(5/30 Pages) MICRONAS

5 / 30 page

DATA SHEET

HAL810

Micronas

Feb. 6, 2009; DSH000034_003EN

1.3. Marking Code

The HAL810 has a marking on the package surface

(branded side). This marking includes the name of the

sensor and the temperature range.

1.4. Operating Junction Temperature Range (TJ)

The Hall sensors from Micronas are specified to the

chip temperature (junction temperature TJ).

A:TJ = −40 °C to +170 °C

K:TJ = −40 °C to +140 °C

The relationship between ambient temperature (TA)

and junction temperature is explained in Section 4.5.

on page 24.

1.5. Hall Sensor Package Codes

Example: HAL810UT-K

→ Type:

810

→ Package:

TO92UT

→ Temperature Range: T

J = −40 °C to +140 °C

Hall sensors are available in a wide variety of packag-

ing versions and quantities. For more detailed informa-

tion, please refer to the brochure: “Hall Sensors:

Ordering Codes, Packaging, Handling”.

1.6. Solderability and Welding

Soldering

During soldering, reflow processing and manual

reworking, a component body temperature of 260 °C

should not be exceeded.

Welding

Device terminals should be compatible with laser and

resistance welding. Please note that the success of

the welding process is subject to different welding

parameters which will vary according to the welding

technique used. A very close control of the welding

parameters is absolutely necessary in order to reach

satisfying results. Micronas, therefore, does not give

any implied or express warranty as to the ability to

weld the component.

1.7. Pin Connections and Short Descriptions

Fig. 1–1: Pin configuration

Type

Temperature Range

HAL810

810A

810K

HALXXXPA-T

Temperature Range: A or K

Package: UT for TO92UT-1/-2

Type: 810

No.

Pin Name

Type

Short Description

VDD

Supply Voltage and

Programming Pin

GND

Ground

OUT

Push-Pull Output

VDD

OUT

GND

HAL810 Datasheet(PDF) 5 Page - Micronas

HAL810 Datasheet(HTML) 5 Page - Micronas

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Datasheet Download

Link URL