430 datasheet(61/71 Pages) INTEL

61 / 71 page

Datasheet

Package Mechanical Specifications and Pin Information

SLP#

Input

SLP# (Sleep), when asserted in Stop-Grant state, causes the

processor to enter the Sleep state. During Sleep state, the processor

stops providing internal clock signals to all units, leaving only the

Phase-Locked Loop (PLL) still operating. Processors in this state will

not recognize snoops or interrupts. The processor will recognize only

assertion of the RESET# signal, deassertion of SLP#, and removal of

the BCLK input while in Sleep state. If SLP# is deasserted, the

processor exits Sleep state and returns to Stop-Grant state,

restarting its internal clock signals to the bus and processor core

units. If DPSLP# is asserted while in the Sleep state, the processor

will exit the Sleep state and transition to the Deep Sleep state.

SMI#

Input

SMI# (System Management Interrupt) is asserted asynchronously

by system logic. On accepting a System Management Interrupt, the

processor saves the current state and enter System Management

Mode (SMM). An SMI Acknowledge transaction is issued, and the

processor begins program execution from the SMM handler.

If SMI# is asserted during the deassertion of RESET# the processor

will tristate its outputs.

STPCLK#

Input

STPCLK# (Stop Clock), when asserted, causes the processor to

enter a low power Stop-Grant state. The processor issues a Stop-

Grant Acknowledge transaction, and stops providing internal clock

signals to all processor core units except the FSB and APIC units.

The processor continues to snoop bus transactions and service

interrupts while in Stop-Grant state. When STPCLK# is deasserted,

the processor restarts its internal clock to all units and resumes

execution. The assertion of STPCLK# has no effect on the bus clock;

STPCLK# is an asynchronous input.

TCK

Input

TCK (Test Clock) provides the clock input for the processor Test Bus

(also known as the Test Access Port).

Please contact your Intel representative for termination

requirements and implementation details.

TDI

Input

TDI (Test Data In) transfers serial test data into the processor. TDI

provides the serial input needed for JTAG specification support.

Please contact your Intel representative for termination

requirements and implementation details.

TDO

Output

TDO (Test Data Out) transfers serial test data out of the processor.

TDO provides the serial output needed for JTAG specification

support.

Please contact your Intel representative for termination

requirements and implementation details.

TEST1

Input

TEST1 must have a stuffing option of separate pull-down resistor to

SS.

Please contact your Intel representative for more detailed

information.

TEST2

Input

TEST2 must have a 51-Ω ±5% pull-down resistor to V

SS.

Please contact your Intel representative for more detailed

information.

THERMDA

Other

Thermal Diode Anode.

THERMDC

Other

Thermal Diode Cathode.

Table 15.

Signal Description (Sheet 7 of 8)

Name

Type

Description

430 Datasheet(PDF) 61 Page - Intel Corporation

430 Datasheet(HTML) 61 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

Datasheet Download

Link URL