FX633 datasheet(4/13 Pages) CMLMICRO

4 / 13 page

Call Progress Tone Detector

FX633

D/633/3

1.3

Signal List

Package

Signal

Description

Pin No.

Name

Type

XTAL/CLOCK

I/P

The input to the on-chip oscillator, for external

Xtal circuit or clock.

XTALN

O/P

The inverted output of the on-chip oscillator.

ENABLE

I/P

A logic "0" pulse of at least 1µs applied to this

input resets the decoder circuits and forces both

DETECT1 and DETECT2 outputs to a logic "0".

DETECT1

O/P

When a call progress signal is detected, this

output goes to a logic "1".

SIGIN

I/P

Signal input. Signals to this pin should be ac

coupled. The dc bias of this pin is set internally.

Vss

Power

The negative supply rail (ground).

DETECT2

O/P

This output is used in conjunction with

DETECT1.

When DETECT1 is at a logic "1", this output

goes to a logic "1" if a Call Progress High Band

signal is detected.

When DETECT1 is at a logic "0", this output

goes to a logic "1" if a Non Call Progress signal

is detected.

VDD

Power

The positive supply rail. This pin should be

decoupled to VSS by a capacitor.

1, 4, 6,

8, 9, 11,

14, 16

Internal Connection. Do not make any

connection to these pins.

Notes:

I/P

Input

O/P

Output

FX633 Datasheet(PDF) 4 Page - CML Microcircuits

FX633 Datasheet(HTML) 4 Page - CML Microcircuits

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13

Datasheet Download

Link URL