TDA7419_09 datasheet(18/40 Pages) STMICROELECTRONICS

Part #	TDA7419

Description	3 band car audio processor

PDF	40 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

18 / 40 page

Description of the audio processor

TDA7419

18/40

4.4.3

Low and high frequency boost

Figure 6 shows the different loudness shapes in low and high frequency boost.

Figure 6.

Loudness attenuation, fC = 2.4 kHz

4.4.4

Flat mode

In flat mode the loudness stage works as a 0 dB to -15 dB attenuator.

4.5

Soft-mute

The digitally controlled soft-mute stage allows muting/demuting the signal with a I2C bus

programmable slope. The mute process can either be activated by the soft-mute pin or by

the I2C bus. This slope is realized in a special S-shaped curve to mute slow in the critical

regions (see Figure 7).

For timing purposes the bit 0 of the I2C bus output register is set to 1 from the start of muting

until the end of demuting.

-2 0

-1 5

-1 0

-5

10 0

10K

TDA7419 Datasheet(PDF) 18 Page - STMicroelectronics