1987254-2 datasheet(6/44 Pages) STMICROELECTRONICS

6 / 44 page

SOLARLOK Connectivity Systems for PV Manufacturers

te.com/solar

Catalog 3-1773458-7 | Issue Date 04/2011

Dimensions are in inches and millimeters unless otherwise specified.

Values in brackets are standard equivalents. Dimensions are shown

for reference purposes only. Specifications subject to change.

USA: 1-800-522-6752

Latin/S. America: +54 (0) 11-4733-2200

France: +33 (0) 1-3420-8686

Canada: +1-905-475-6222

Germany: +49 (0) 6251-133-1999

Netherlands: +31 (0) 73-6246-999

Mexico: +52 (0) 55-1106-0800

UK: +44 (0) 800-267666

China: +86 (0) 400-820-6015

Junction Box

•Variable wiring options

•Simple, fast and cost-effective assembly

•Flat, low profile design

•High current carrying capacity

•Good thermal balance

•Connectorized or direct wire configurations

•Up to four outputs possible

•Up to six internal rails

•Customer-specific solutions

•TÜV and UL approved

Cable Couplers

•Simple on-site processing

•Mating safety provided by keyed housings

•Semi-automatic assembly capability possible

•Multiple plugging and unplugging cycles

•Accomodates solar cable with different

insulation diameters

•High current carrying capacity

•Wide temperature operating range

•TÜV and UL approved

Solar Cable

•Dual wall insulation

•Electron beam cross-linked

•Excellent resistance to U.V., water,

ozone, fluids, salt, general weathering

•Excellent resistance to abrasion

•Halogen free, flame retardant, low toxicity

•Very low smoke emissions

•Excellent flexibility and stripping performance

•Temperature Rating : –40°C up to +125°C

•Nominal Voltage : Vo/V 1800/3000 VAC,

2600 VDC

•Test Voltage : 6KV, 50Hz, 5min

•Bending Radius : ≥ 5 x outer diameter

•TÜV and UL approved

System Features

The SOLARLOK Product Concept

Market expansion of the formerly regulated

energy supply sector, increased global

environmental awareness and governments

committing themselves to more stringent

environmental targets have opened up new

opportunities for the photovoltaic industry.

Having served a niche market in the past, the

photovoltaics industry now has the opportunity

to move into mass production, realizing

economies of scale and gaining a greater

market share of the world’s energy mix.

TE has contributed to the establishment of this

environmentally-friendly technology with the

introduction of its SOLARLOK connector system.

The SOLARLOK connector system delivers a

flexible system solution for easy and reliable

interconnections from photovoltaic modules to

the DC/AC converter. The entire system concept

is based on cost-effective and reliable processing

of individual interconnection system components.

This significantly reduces installation costs of

the solar energy system.

The junction box concept is based on a flexible,

open system structure, which allows serial as well

as parallel interconnection via direct wire connect

or separable connectors. Within the junction box,

up to six termination places rails are available for

photovoltaic foil connection. If required by the

customer, the junction box can be delivered

pre-configured with diodes, jumpers, plug

connectors, and solar cable pigtails.

The male and female cable couplers were

designed for high voltage and high current-

carrying capacity in addition to the well-

established IP 67 sealing requirement in the

photovoltaic industry. Mating safety is provided

by polarity keyed housings, fully shrouded

contacts, reliable high cycle life, and a squeeze

to release connection system. In addition, a wide

temperature range and fulfillment of worldwide

standards for photovoltaic connection systems

complement the robust product specification.

1987254-2 Datasheet(PDF) 6 Page - STMicroelectronics

1987254-2 Datasheet(HTML) 6 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Datasheet Download

Link URL