LMV932MM datasheet(2/31 Pages) TI1

2 / 31 page

LMV931-N, LMV931-N-Q1, LMV932-N, LMV932-N-Q1

LMV934-N, LMV934-N-Q1

SNOS993L – NOVEMBER 2001 – REVISED MARCH 2013

www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1) (2)

Charged Device Model

750V

ESD Tolerance(3)

Machine Model

200V

Human Body Model

2000V

Supply Voltage (V+–V −)

Differential Input Voltage

± Supply Voltage

Voltage at Input/Output Pins

V++0.3V, V--0.3V

Storage Temperature Range

−65°C to 150°C

Junction Temperature(4)

150°C

For soldering specifications:

See product folder at www.ti.com and http://www.ti.com/lit/SNOA549

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test

conditions, see the Electrical Characteristics.

(2)

If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office / Distributors for availability and

specifications.

(3)

Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of

JEDEC)Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC).

(4)

The maximum power dissipation is a function of TJ(MAX), θJA and TA. The maximum allowable power dissipation at any ambient

temperature is PD = (TJ(MAX) – TA)/ θJA. All numbers apply for packages soldered directly onto a PC Board.

Operating Ratings

(1)

Supply Voltage Range

1.8V to 5.5V

Temperature Range

−40°C to 125°C

5-Pin SC70

414°C/W

5-Pin SOT-23

265°C/W

8-Pin VSSOP

235°C/W

Thermal Resistance (

θJA)

8-Pin SOIC

175°C/W

14-Pin TSSOP

155°C/W

14-Pin SOIC

127°C/W

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test

conditions, see the Electrical Characteristics.

1.8V DC Electrical Characteristics

Unless otherwise specified, all limits guaranteed for TJ = 25°C. V

+ = 1.8V, V − = 0V, V

CM = V

+/2, V

O = V

+/2 and R

L > 1 MΩ.

Boldface limits apply at the temperature extremes. See

(1)

Symbol

Parameter

Condition

Min

Typ

Max

Units

(2)

(3)

(2)

VOS

Input Offset Voltage

LMV931-N (Single)

LMV932-N (Dual)

5.5

LMV934-N (Quad)

7.5

(1)

Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very

limited self-heating of the device such that TJ = TA. No guarantee of parametric performance is indicated in the electrical tables under

conditions of internal self-heating where TJ > TA. See Applications section for information of temperature derating of the device. Absolute

Maximum Ratings indicated junction temperature limits beyond which the device may be permanently degraded, either mechanically or

electrically.

(2)

All limits are guaranteed by testing or statistical analysis.

(3)

Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary

over time and will also depend on the application and configuration. The typical values are not tested and are not guaranteed on

shipped production material.

Submit Documentation Feedback

Product Folder Links: LMV931-N LMV931-N-Q1 LMV932-N LMV932-N-Q1 LMV934-N LMV934-N-Q1

LMV932MM Datasheet(PDF) 2 Page - Texas Instruments

LMV932MM Datasheet(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Datasheet Download

Link URL