DM3725CBC datasheet(182/280 Pages) TI

182 / 280 page

DM3730, DM3725

SPRS685D

– AUGUST 2010 – REVISED JULY 2011

www.ti.com

6.4.2

SDRAM Memory Controller (SDRC)

NOTE

For more information, see Memory Subsystem / SDRAM Controller (SDRC) Subsystem

section of the AM/DM37x Multimedia Device Technical Reference Manual (literature number

SPRUGN4).

The SDRAM controller subsystem module provides connectivity between the processor and external

DRAM memory components. The module includes support for double-data-rate SDRAM (mobile DDR).

6.4.2.1

LPDDR Interface

The LPDDR interface is balled out on the bottom side of the CUS package and on the top side of the POP

packages. The LPDDR interface on the top of the POP package has been designed for compatibility any

POP LPDDR device with a matching footprint and compliance with the JEDEC LPDDR-266 specification.

This section provides the timing specification for the bottom-side LPDDR interface as a PCB design and

manufacturing specification. The design rules constrain PCB trace length, PCB trace skew, signal

integrity, cross-talk, and signal timing. These rules, when followed, result in a reliable LPDDR memory

system without the need for a complex timing closure process. For more information regarding guidelines

for using this LPDDR specification, see the Understanding TI's PCB Routing Rule-Based DDR Timing

Specification Application Report (literature number SPRAAV0).

6.4.2.1.1 LPDDR Interface Schematic

Figure 6-17 and Figure 6-18 show the LPDDR interface schematics for a LPDDR memory system. The 1

x16 LPDDR system schematic is identical to Figure 6-17 except that the high word LPDDR device is

deleted.

182

Timing Requirements and Switching Characteristics

Submit Documentation Feedback

Product Folder Link(s): DM3730 DM3725

DM3725CBC Datasheet(PDF) 182 Page - Texas Instruments