© 2006 Microchip Technology Inc.

DS80271A-page 1

PIC10F220/222

The PIC10F220/222 parts you have received conform

functionally to the Device Data Sheet (DS41270B),

except for the anomalies described below.

All issues listed here will be addressed in future

revisions of the PIC10F220/222 silicon. Where noted,

problems apply to listed revision only.

1.

Module: Analog-to-Digital (A/D)

Converter

PIC10F220/222 silicon Rev. A1. The A/D Converter

does not meet the design target. The specifications

listed below in Table 10-6 supersede Table 10-6 in

DS41270B.

TABLE 10-6:

A/D CONVERTER CHARACTERISTICS AT 8 BITS

Param

No.

Sym

Characteristic

Min

Typ†

Max

Units

Conditions

A03

EIL

Integral Error

—

—

±2

Lsb

A04

EDL

Differential Error

—

—

-1

≤ EDL ≤2Lsb

A06

EOFF

Offset Error

—

—

±2

LSb

A07

EGN

Gain Error

—

—

±2

LSb

A10

—

Monotonicity

—

——

*

These parameters are characterized but not tested.

† Data in the “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design

guidance only are not tested.

Note 1:

This will be addressed in future silicon revisions.

PIC10F220/222 Rev. A Silicon Errata