RL78 Family

EEPROM Emulation Library Pack02 Ver.1.01

Release Note

R20UT2645EJ0100

Rev.1.00

Page 11 of 15

Mar 28, 2014

Chapter 7

How To Debug a Program

For details about how to perform debugging by using IECUBE or the on-chip debug emulator E1 or E20, see the

following document. Download the following document from the “Integrated Development Environment CubeSuite+”

page on the Renesas Electronics Web site.

Title

CubeSuite+ Integrated Development Environment User's Manual: RL78 Debug

7.1

Notes at Debug

The following describes notes apply when using the EEPROM Emulation Library Pack02 with the E1 or E20

on-chip debugging emulator.

(1) When a command of the EEPROM Emulation Library Pack02 Ver. 1.01 is executed in a version older than

CubeSuite+ Ver. 1.01 and the E1 or E20 on-chip debugging emulator is in use, do not execute a break until you

have confirmed completion of the command by the sequencer. The sequencer will malfunction if a break occurs

before the sequencer has completed the command.

(2) The simulator cannot be used to debug the flash library.