IO196NPB3 datasheet(202/210 Pages) MICROSEMI

202 / 210 page

Datasheet Information

5- 6

R ev isio n 1 5

Revision 2 (cont’d)

The "ProASIC3 FPGAs Package Sizes Dimensions" table is new.

In the "ProASIC3 Ordering Information", the QN package measurements were

updated to include both 0.4 mm and 0.5 mm.

III

In the General Description section the number of I/Os was updated from 288 to

300.

1-1

Packaging v1.2

The "QN68 – Bottom View" section is new.

4-3

Revision 1 (Feb 2008)

DC and Switching

Characteristics v1.1

In Table 2-2 • Recommended Operating Conditions 1, TJ was listed in the symbol

column and was incorrect. It was corrected and changed to TA.

2-2

In Table 2-3 • Flash Programming Limits – Retention, Storage and Operating

Temperature, Maximum Operating Junction Temperature was changed from

110°C to 100°C for both commercial and industrial grades.

2-2

The "PLL Behavior at Brownout Condition" section is new.

2-3

In the "PLL Contribution—PPLL" section, the following was deleted:

FCLKIN is the input clock frequency.

2-13

In Table 2-21 • Summary of Maximum and Minimum DC Input Levels, the note

was incorrect. It previously said TJ and it was corrected and changed to TA.

2-20

In Table 2-115 • ProASIC3 CCC/PLL Specification, the SCLK parameter and note

1 are new.

2-89

Table 2-125 • JTAG 1532 was populated with the parameter data, which was not

in the previous version of the document.

2-107

Packaging v1.1

In the "VQ100" A3P030 pin table, the function of pin 63 was incorrect and

changed from IO39RSB0 to GDB0/IO38RSB0.

4-19

Revision 0 (Jan 2008) This document was previously in datasheet v2.2. As a result of moving to the

handbook format, Actel has restarted the version numbers.

N/A

v2.2

(July 2007)

The M7 and M1 device part numbers have been updated in Table 1 • ProASIC3

Product

Family,

"I/Os

Per

Package",

"Automotive

ProASIC3

Ordering

Information",

"Temperature

Grade

Offerings",

and

"Speed

Grade

and

Temperature Grade Matrix".

i, ii, iii,

iii, iv

The words "ambient temperature" were added to the temperature range in the

"Automotive ProASIC3 Ordering Information", "Temperature Grade Offerings",

and "Speed Grade and Temperature Grade Matrix" sections.

iii, iv

The TJ parameter in Table 3-2 • Recommended Operating Conditions was

changed to TA, ambient temperature, and table notes 4–6 were added.

3-2

v2.1

(May 2007)

In the "Clock Conditioning Circuit (CCC) and PLL" section, the Wide Input

Frequency Range (1.5 MHz to 200 MHz) was changed to (1.5 MHz to 350 MHz).

The "Clock Conditioning Circuit (CCC) and PLL" section was updated.

In the "I/Os Per Package" section, the A3P030, A3P060, A3P125, ACP250, and

A3P600 device I/Os were updated.

Table

3-5 • Package

Thermal

Resistivities

was

updated

with

A3P1000

information. The note below the table is also new.

3-5

Revision

Changes

Page

IO196NPB3 Datasheet(PDF) 202 Page - Microsemi Corporation

IO196NPB3 Datasheet(HTML) 202 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL