September 2013

DocID11322 Rev 2

1/16

16

AN2142

Application note

ST10F27X firmware development

getting started with tasking ST10 toolchain

Introduction

This document provides an introduction to the Tasking toolchain (version v8.5 r1) for the ST10F27x

product family. It describes the software environment required to develop an ST10F27x application and

summarizes the different steps needed to configure the Tasking development toolset, to build and to

debug an application on the target hardware.

Two software examples are supplied with this application note. The first one is a small application

demonstrating an input / output toggling function. The required steps to create the project, build and

debug it will be described. The second one illustrates another example using interrupts. Both examples

are loaded and executed from an external RAM using Tasking RAM monitor.

The application source files are provided within an archived file. This file must be unpacked into a

directory before use.

http:/www.st.com