LTC1418AIN datasheet(17/28 Pages) LINER

17 / 28 page

LTC1418

APPLICATIONS INFORMATION

Figure 12d. Suggested Evaluation Circuit Board—Solder Side Layout

1418 F12d

Bypass capacitors must be located as close to the pins as

possible. The traces connecting the pins and the bypass

capacitors must be kept short and should be made as wide

as possible.

Example Layout

Figures 12a, 12b, 12c and 12d show the schematic and

layout of a suggested evaluation board. The layout demon-

strates the proper use of decoupling capacitors and ground

plane with a 2-layer printed circuit board.

DIGITAL INTERFACE

The LTC1418 can operate in serial or parallel mode. In

parallel mode the ADC is designed to interface with micro-

processors as a memory mapped device. The CS and RD

control inputs are common to all peripheral memory

interfacing. In serial mode only four digital interface lines

are required, SCLK, CONVST, EXTCLKIN and DOUT. SCLK,

the serial data shift clock can be an external input or

supplied by the LTC1418 internal clock.

Internal Clock

The ADC has an internal clock. In parallel output mode the

internal clock is always used as the conversion clock. In

serial output mode either the internal clock or an external

clock may be used as the conversion clock (see Figure 20).

The internal clock is factory trimmed to achieve a typical

conversion time of 3.4

µs and a maximum conversion time

over the full operating temperature range of 4

µs. No exter-

nal adjustments are required, and with the guaranteed maxi-

mum acquisition time of 1

µs, throughput performance of

200ksps is assured.

Power Shutdown

The LTC1418 provides two power shutdown modes, nap

and sleep, to save power during inactive periods. The nap

mode reduces the power by 80% and leaves only the

digital logic and reference powered up. The wake-up time

from nap to active is 500ns (see Figure 13a). In sleep

mode all bias currents are shut down and only leakage

current remains— about 2

µA. Wake-up time from sleep

LTC1418AIN Datasheet(PDF) 17 Page - Linear Technology

LTC1418AIN Datasheet(HTML) 17 Page - Linear Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Datasheet Download

Link URL