RF Micro Devices Inc.

7628 Thorndike Road, Greensboro, NC 27409-9421

DS131104

For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.

The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of

third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended

application circuitry and specifications at any time without prior notice.

2 of 4

DBM-183

Absolute Maximum Ratings

Parameter

Rating

Unit

Operating Temperature Range

-54 to +100

°C

Total Input Power at 25°C

400

mW

Total Input Power (Derated Linearly) at 100°C

100

mW

Specifications guaranteed with IF from 50 to 400MHz. For higher IF frequencies, consult IF

response curve for typical roll-off.

Environmental conditions: All units are designed to meet their specifications between -54°C and

+100°C and after exposure to any or all of the following tests per MIL-STD-202E.



Thermal Shock: Method 107D, Test Condition B



Altitude: Method 105C, Test Condition G



H.F. Vibration: Method 204C, Test Condition D



Mechanical Shock: Method 213B, Test Condition C



Random Vibration (15 minutes per axis): Method 214, Test Condition IIF



Solderability: Method 208C



Terminal Strength: Method 211A, Test Condition C



Resistance to Soldering Heat: Method 210A, Test Condition B

Sealed units meet the requirements of Method 106D of MIL-STD-202E when exposed to

humidity.

Caution! ESD sensitive device.

Exceeding any one or a combination of the Absolute

Maximum Rating conditions may cause permanent

damage to the device. Extended application of Absolute

Maximum Rating conditions to the device may reduce

device reliability. Specified typical performance or

functional operation of the device under Absolute

Maximum Rating conditions is not implied.

Nominal Operating Parameters

Parameter

Specification

Unit

Condition

Min

Typ

Max

General Performance

LO +13dBm (High side LO), RF -10dBm, IF 100MHz

Operating Frequency Range

L Port

10

4000

MHz

R Port

10

4000

MHz

X Port

5

4000

MHz

Specifications guaranteed with IF from 50 to 400MHz. For higher IF frequencies, consult IF response curve for typical roll-off.

Frequency Bands

10MHz to 50MHz (dB)

50MHz to 1000MHz (dB)

1000MHz to 2500MHz (dB)

2500MHz to 4000MHz (dB)

Conversion Loss

8.5

8.0

8.5

10.5

L-R Isolation

25

27

25

20

L-X Isolation

15

20

20

20

R-X Isolation

15

20

25

15

Specifications guaranteed with IF from 50 to 400MHz. For higher IF frequencies, consult IF response curve for typical roll-off.