7 of 27

RF5602

DS120213

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com.

Pin

Function

Description

1BIAS VCC

2RF IN

RF input.

3PDOWN

4VREG1

First stage input bias voltage. This pin requires a regulated supply to maintain nominal bias current.

5VREG2

Second stage input bias voltage. This pin requires a regulated supply to maintain nominal bias current.

6VREG3

Third stage input bias voltage. This pin requires a regulated supply to maintain nominal bias current.

7NC

Not connected. May be connected to ground.

8

P DETECT

Power detector provides an output voltage proportional to the RF output power level.

9NC

Not connected. May be connected to ground.

10

VCC3/

RF OUT

RF output and bias for the output stage. Output is externally matched to 50

 and needs DC block.

11

VCC3/

RF OUT

Same as pin 10.

12

VCC3/

RF OUT

Same as pin 10.

13

VCC2

Second stage supply voltage.

14

VCC2

Same as pin 13.

15

NC

Not connected. May be connected to ground.

16

VCC1

First stage supply voltage.

Pkg

Base

GND

Ground connection. The back side of the package should be connected to the ground plane through as short a

connection as possible, e.g., PCB vias under the device are recommended.