4 of 12

RFFM7600

DS120427

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com.

Pin Names and Descriptions

Pin

Name

Description

1GND

Ground connection

2GND

Ground connection

3

VCC3

This pin is connected internally to the collector of the 3rd stage RF device. To achieve specified perfor-

mance, the layout of these pins should match the Recommended Land Pattern.

4

VCC2

This pin is connected internally to the collector of the 2nd stage RF device. To achieve specified perfor-

mance, the layout of these pins should match the Recommended Land Pattern.

5GND

Ground connection

6

VCC1

This pin is connected internally to the collector of the 1st stage RF device. To achieve specified perfor-

mance, the layout of these pins should match the Recommended Land Pattern.

7VBIAS

Supply voltage for the bias reference and control circuits.

8GND

Ground connection

9GND

Ground connection

10

TXIN

RF input is internally matched to 50

 and DC blocked.

11

GND

Ground connection

12

PDOWN

13

VREG1

First stage bias voltage. This Pin requires regulated supply for best performance.

14

VREG2

Second stage bias voltage. This Pin requires regulated supply for best performance.

15

VREG3

Third stage bias voltage. This Pin requires regulated supply for best performance.

16

PDET

Power detector provides an output voltage proportional to the RF output power level.

17

GND

Ground connection

18

RX

RF Output is internally matched to 50

 and DC blocked.

19

VRX

Switch control for RX mode

20

GND

Ground connection

21

ANT

RF Output is internally matched to 50

 and DC blocked.

22

GND

Ground connection

23

GND

Ground connection

24

VTX

Switch control for TX mode

PkG Base

GND

Ground connection