www.belling.com.cn

6

BL8095

RDSONs of the MOSFETs and parasitic capacitances. At light load, this loss is prominent and efficiency is therefore very

low. BL8095 employs a proprietary control scheme that improves efficiency in this situation by enabling the device into a

power save mode during light load, thereby extending the range of high efficiency operation.

COMPONENT SELECTRION

When setting up the BL8095 for different output voltage, please use following recommended component value for the

best performance.

L (H)

5

22

6.8 - 10

3.3

22

4.7 - 10

2.5

22

3.3 - 10

THERMAL CONSIDERATION

BL8095 is high efficiency Buck converter, which means it consumes very few power when converting the high voltage to

low voltage. However, when output power is very large, like 5V/1.2A, the output power is as high as 6W, a heat

dissipation path is strongly recommended to be routed on PCB. BL8095 is in SOT23-6 package. The heat is conducted out

via Pin 2 (GND), so the heat dissipation route on PCB should be connected to the Pin 2 of the chip.

PACKAGE OUTLINE

Package

SOT23-6

Devices per reel

3000

Unit

mm

Package specification：