PDSP16116AB0AC datasheet(11/17 Pages) MITEL

11 / 17 page

PDSP16116

CLK

24n23n22n21

′, B′, BTOUT

SOBFP

EOPSS

A, B, W,

WTA, WTB

GWR

234567

212

START OF

FIRST PASS

END OF FIRST PASS/

START OF NEXT PASS

(MINIMUM NUMBER OF

LAY CYCLES SHOWN).

PERIOD BETWEEN

OTHER INTERMEDIATE

PASSES IS SIMILAR.

NOTES

1. 1 = FIRST CYCLE OF DATA IN PASS

2. n = LAST CYCLE OF DATA IN PASS

In practice, data output may never approach the theoretical

maximum. Hence, it may be worthwhile to try various universal

exponents and choose the one best suited to the particular ap-

plication.

Data is output from the butterfly processor with a two-part

exponent: the 5-bit GWR applicable to all data words from a

given FFT and a 2-bit WTOUT associated with each individual

dataword. To find the complete exponent for a given word, the

GWR for that FFT must be modified by its WTOUT as shown in

Table 6. The result is the number of places the binary point has

shifted to the right during the course of the FFT.

This value must be compared with the universal exponent to

determine the shift required. This is done by subtracting it from

the universal exponent. The number of places to be shifted is

equal to the difference between the two exponents. The shift

can be implemented in a PDSP1601/A (the shift value is fed

into the SV port).

As FFT data consists of real and imaginary parts, either two

PDSP1601/As must be used (controlled by the same logic) or a

single PDSP1601/A could be used handling real and imaginary

data on alternate cycles (using the same instructions for both

cycles).

An example of an output normalisation circuit is shown

in Fig.8. Only 4-bit data paths are used in calculating the

shift. This means that we must be able to trap very small

values negative of GWR and force a 15-bit right shift in

such cases.

NB It is easier to simply add the word tag to the exponent for the

purpose of determing the shift required, instead of modifying it

according to Table.6. To compensate for this, the universal ex-

ponent may be increased by one.

Fig. 8 Output normalisation circuit

4-BIT ADDER

GWR

WTOUT

4-BIT SUBTRACTOR

UNIVERSAL

EXPONENT

4-BIT MUX

1111

SIGN

BIT

16-BIT DATA

PDSP1601

SV PORT

B PORT

C PORT

ASRSV

NORMALISED OUTPUT DATA

Fig. 7 Use of the BFP control signals

PDSP16116AB0AC Datasheet(PDF) 11 Page - Mitel Networks Corporation

PDSP16116AB0AC Datasheet(HTML) 11 Page - Mitel Networks Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Datasheet Download

Link URL