AS3435 datasheet(59/102 Pages) AMSCO

59 / 102 page

ams Datasheet, Confidential: 2014-Jun-13 [v1-30]

AS3415/AS3435 – 59

Detaile d Desc rip t ion

The I²C addresses for the devices in the different connection

modes can be found in Figure 74.

Figure 74:

I²C Slave Address Table

I²C Slave Address Table: Shows the two I²C addresses for the AS3515/35 depending on the master connection.

When the I²C master is accessing two devices on the bus it is

important not violating the minimum bus idle time of 2.5ms.

Thus, if the I²C master is communicating with device one it is

not possible to read/write for example from device two right

after a read/write command has been sent to device one

without a minimum bus idle time of 2.5ms. Due to the reason

that the AS3415/35 does not have a dedicated I²C address

selection pin this idle time is necessary to recover the internal

I²C address selection block for a correct I²C slave address

detection. The I²C address selection timing diagram in Figure 75

shows the necessary bus idle time.

Figure 75:

I²C Address Selection Timing

DEVICE Number

7 bit I²C address

8 Bit read address

8 Bit write address

1(default)

0x47

0x8F

0x8E

0x46

0x8D

0x8C

I2C Bus Traffic

DEVICE1:WRITE

DEVICE1:READ

DEVICE1:WRITE

DEVICE1:READ

BUS IDLE

I2C Bus Traffic

DEVICE2:WRITE

DEVICE2:READ

DEVICE2:WRITE

DEVICE2:READ

BUS Condition

Target Device

>2.5ms

AS3435 Datasheet(PDF) 59 Page - ams AG

AS3435 Datasheet(HTML) 59 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL