(V

CC

= +5V, V

Parameter

Conditions

Typ

+25˚C

Min/Max

+25˚C

Min/Max

−40˚C to

+85˚C

Units

Input and Output Parameters

MUTE current input-HIGH

V

5.0

nA

MUTE current input-LOW

V

0.2

nA

TIMING PERFORMANCE

CD Response Time

carrier applied

(Note 8)

1.0

_

_

µs

carrier removed

(Note 9)

12

_

_

µs

MUTE response time

(Note 10)

2.0

_

_

ns

MISCELLANEOUS PERFORMANCE

input resistance

single-ended

7.3

_

_

k

Ω

input capacitance

single-ended (Note 11)

1.0

_

_

pF

Z

19

_

_

dB

maximum cable attenuation

200 MHz (Note 13)

40

_

_

dB

Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices

should be operated at these limits. The table of “Electrical Characteristics” specifies conditions of device operation.

Note 2: Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined

from tested parameters.

Note 3: J-level: spec. is 100% tested at +25˚C.

will attenuate the signal prior to entering the equalizer.

Note 5: Peak-to-peak jitter is defined as 6 times the rms jitter.

Note 6: For more information, see “CLC014 Operation” and “Design Guidelines”.

Note 7: 50% eye opening.

Note 8: Time from application of a valid signal to when the CD output asserts high.

Note 9: Time from the removal of a valid signal to when the CD output asserts low.

Note 10: Time from assertion of MUTE to when the output responds.

Note 11: Device only. Does not include typical pc board parasitics.

Note 12: Includes typical pc board parasitics.

Note 13: This sets the maximum cable length for the equalizer.

Note 14: Human body model, 1.5 k

Ω in series with 100 pF; based on limited test data.

Note 15: To maintain specified performance, do not reduce DO/DO below this level.

www.national.com

4