38 | Keysight | Infiniium S-Series High-Definition Oscilloscopes - Data Sheet

Measurements and math

Measurements and math

Math functions can operate on any combination of channels, memories, or other functions

Math functions

Up to 16 independent functions

Gates

Up to 16 (any function can be used as a gate)

Waveform measurements

Can be made on either main, zoom, or gated region with up to 20 simultaneous measurements

Waveform memories

Four for scope waveforms, one memory that includes all digital channels simultaneously

Voltage (scope channels)

Peak-to-peak, minimum, maximum, average, RMS, amplitude, base, top, overshoot, V overshoot, preshoot, V

preshoot, upper, middle, lower, crossing point voltage , pulse top, pulse base, pulse amplitude

Time (digital channels)

Period, frequency, positive width, negative width, duty cycle, delta time

Time (scope channels)

Rise time, fall time, period, frequency, positive width, negative width, duty cycle, Tmin, Tmax, Tvolt, channel-to-

channel delta time, channel-to-channel phase, count pulses, burst width, burst period, burst interval, setup time,

hold time

Mixed (scope channels only)

Area, slew rate

Frequency domain

FFT frequency, FFT magnitude, FFT delta frequency, FFT delta magnitude

Level qualification

Any channels that are not involved in a measurement can be used to level-qualify all timing measurements

Eye-diagram measurements

Eye height, eye width, eye jitter, crossing percentage, Q factor, and duty-cycle distortion

Measurement modes

Statistics

Displays the mean, standard deviation, minimum, maximum range, and number of measurement values for the

displayed automatic measurements

Histograms

Source

Waveform or measurement

Orientation

Vertical (for timing and jitter measurements) or horizontal (noise and amplitude change) modes, regions are defined

using waveform markers

Measurements

Mean, standard deviation, mean ± 1, 2, and 3 sigma, median, mode, peak-to-peak, min, max, total hits, peak (area of

most hits), X scale hits, and X offset hits

Marker modes

Manual markers, track waveform data, track measurements, and delta marker values can be displayed

Waveform math

Operators

subtract, versus, chart (MSO models)

Automatic measurements

Measure menu access to all measurements, up to 20 measurements can be displayed simultaneously

Multipurpose

User-selectable for saving images when pressed or taking a series of measurements defined by the user, or other

actions

Drag-and-drop measurement

toolbar

Measurement toolbar with common measurement icons that can be dragged and dropped onto the displayed

waveforms

FFT (FFT viewer is standard)

Frequency range

DC to 10 GHz (at 20 GSa/s) or 5 GHz (at 10 GSa/s)

Frequency resolution

Resolution = sample rate/memory depth

Window modes

Hanning, flattop, rectangular, Blackman Harris, Hamming

1. Requires MATLAB software and license.

Infiniium S-Series Performance Characteristics (Continued)