| Electronic Components Datasheet Search |
|
VPC3232D Datasheet(PDF) 43 Page - Micronas |
|
|
|||||||||||||||||||||||||||||
VPC3232D Datasheet(HTML) 43 Page - Micronas |
|
43 / 78 page ![]() ADVANCE INFORMATION VPC 323xD, VPC 324xD Micronas 43 DVCO h’f8 crystal oscillator center frequency adjust, –2048 ... 2047 –720 DVCO h’f9 crystal oscillator center frequency adjustment value for line-lock mode, true adjust value is DVCO – ADJUST. For factory crystal alignment, using standard video signal: disable autolock mode, set DVCO = 0, set lock mode, read crystal offset from ADJUST register and use negative value for initial center frequency adjustment via DVCO. read only ADJUST h’f7 crystal oscillator line-locked mode, lock command/status write: 100 enable lock 0 disable lock read: 0 unlocked >2047 locked 0XLCK h’b5 crystal oscillator line-locked mode, autolock feature. If autolock is enabled, crystal oscillator locking is started automatically. bit[11:0] threshold, 0:autolock off 400 AUTOLCK FP Status Register h’12 general purpose control bits bit[2:0] reserved, do not change bit[3] vertical standard force bit[8:4] reserved, do not change bit[9] disable flywheel interlace bit[11:10] reserved, do not change to enable vertical free run mode set vfrc to 1 and dflw to 0 0 1 VFRC DFLW h’13 standard recognition status bit[0] 1 vertical lock bit[1] 1 horizontally locked bit[2] 1 no signal detected bit[3] 1 color amplitude killer active bit[4] 1 disable amplitude killer bit[5] 1 color ident killer active bit[6] 1 disable ident killer bit[7] 1 interlace detected bit[8] 1 no vertical sync detection bit[9] 1 spurious vertical sync detection bit[12:10] reserved –ASR h’14 input noise level, available only for VPC 323xC read only NOISE h’cb number of lines per field, P/S: 312, N: 262 read only NLPF h’15 vertical field counter, incremented per field read only VCNT h’74 measured sync amplitude value, nominal: 768 (PAL), 732 (NTSC) read only SAMPL h’31 measured burst amplitude read only BAMPL h’f0 firmware version number bit[7:0] internal revision number bit[11:8] firmware release hardware id see I2C register h’9f read only – FP Sub- address Function Default Name |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |