PS60

PS60

3

Making initial setting

Entering Initial Setting Mode

Operational Procedures

Initial Setting Mode

This mode is used to set non-display mode, magnification and switch outputs.

Non-display setting（two selections）

Factor setting（five selections）

Switch working mode setting（eight combinations）

P1 setting

P2 setting

Hysteresis（0∼30 counts）

Filter setting（F0∼F2）

Press the    and    buttons simultaneously.

Press the    button more than one second.

Press the    and     buttons simultaneously.

Press the    button more than one second.

Display mode

：Standard Mode

：Non-display

Mode

Factor

102R／302R

Switch working mode

：Separate Mode

103R

：Window Comparator Mode

Operations

Mode

Initial

Setting

Mode

Pressure

Setting

Mode

Press the   and   buttons simultaneously in OperationsMode.

After switched to Initial Setting Mode, the third digit will blink.

（The values     for the 102R / 302R model and     for the103R have been set in the factory.）

Press the   button to move to the next digit. The value of the digitmay be set when the LED below

the digit blinks.

The number will change every time the   or   button is pressed.

Press the   button to move to the next digit.

Ｐ１

Ｐ２

ｋＰａ

Ｐ１

Ｐ２

ｋＰａ