Micrel, Inc.

MIC58P01

Timing

Timing Conditions

A. Minimum data active time before strobe enabled (data set-up time) ........................................................................ 50ns

B. Minimum data active time after strobe disabled (data hold time) .............................................................................. 50ns

C. Minimum strobe pulse width ...................................................................................................................................... 125ns

D. Typical time between strobe activation and output on to off transition ..................................................................... 500ns

E. Typical time between strobe activation and output off to on transition...................................................................... 500ns

F. Minimum clear pulse width ........................................................................................................................................ 300ns

G. Minimum data pulse width ........................................................................................................................................ 225ns

June 5, 2015

6

Revision 2.0