SN74LVC2G53

SINGLEPOLE DOUBLETHROW (SPDT) ANALOG SWITCH OR

2:1 ANALOG MULTIPLEXER/DEMULTIPLEXER

SCES324K − JULY 2001 − REVISED SEPTEMBER 2003

3

POST OFFICE BOX 655303

−0.5 V to 6.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−0.5 V to 6.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . .

−50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±50 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±100 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

220

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DCU package

227

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

YEA/YZA package

140

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

YEP/YZP package

102

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltages are with respect to ground unless otherwise specified.

2. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.

3. This value is limited to 5.5 V maximum.

4. The package thermal impedance is calculated in accordance with JESD 51-7.

recommended operating conditions (see Note 5)

MIN

MAX

UNIT

VCC

Supply voltage

1.65

5.5

V

VI/O

I/O port voltage

0

VCC

V

VCC = 1.65 V to 1.95 V

VCC × 0.65

VIH

High-level input voltage, control input

VCC = 2.3 V to 2.7 V

VCC × 0.7

V

VIH

High-level input voltage, control input

VCC = 3 V to 3.6 V

VCC × 0.7

V

VCC = 4.5 V to 5.5 V

VCC × 0.7

VCC = 1.65 V to 1.95 V

VCC × 0.35

VIL

Low-level input voltage, control input

VCC = 2.3 V to 2.7 V

VCC × 0.3

V

VIL

Low-level input voltage, control input

VCC = 3 V to 3.6 V

VCC × 0.3

V

VCC = 4.5 V to 5.5 V

VCC × 0.3

VI

Control input voltage

0

5.5

V

VCC = 1.65 V to 1.95 V

20

∆t/∆v

Input transition rise/fall time

VCC = 2.3 V to 2.7 V

20

ns/V

∆t/∆v

Input transition rise/fall time

VCC = 3 V to 3.6 V

10

ns/V

VCC = 4.5 V to 5.5 V

10

TA

Operating free-air temperature

−40

85

°C

NOTE 5: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,

Implications of Slow or Floating CMOS Inputs, literature number SCBA004.