ZOPT2202 Datasheet

© 2016 Integrated Device Technology, Inc

2

September 21, 2016

Applications



Cellular phones



Notebooks



Consumer devices

I²C

Register File

INT

SDA

SCL

Main State Machine

NVM

Oscillator

Power-On-Reset

Bandgap

Regulator

Reference

GND

VDD

1.7 to 3.6V

Interrupt

Control

= Digital Block

= Analog Block

Sensor

Control

ADC

UVA

ADC

UVB

ADC

UVB2

ADC

COMP

ADC

UV_COMP

ZOPT2202

Block Diagram

Ordering Information

Product Sales Code

Description

Package

ZOPT2202AC5R

ZOPT2202 LGA6 – Temperature range: -40 to +90°C

Reel

ZOPT2202AC9R

ZOPT2202 TSV – Temperature range: -40 to +90°C

Reel

ZOPT2202KIT V1.0

ZOPT2202 Evaluation Kit, including ZOPT Control Board, mini-USB cable, and 1 ZOPT2202 sample mounted

on the LGA6 Sensor Board; kit software is available for free download – see the ZOPT Evaluation Kit Quick

Start-up Guide included in the kit for instructions.

Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138

www.IDT.com

Sales

1-800-345-7015 or 408-284-8200

Fax: 408-284-2775

www.IDT.com/go/sales

Tech Support

www.IDT.com/go/support

DISCLAIMER Integrated Device Technology, Inc. (IDT) reserves the right to modify the products and/or specifications described herein at any time, without notice, at IDT's sole discretion. Performance

specifications and operating parameters of the described products are determined in an independent state and are not guarante ed to perform the same way when installed in customer products. The

information contained herein is provided without representation or warranty of any kind, whether express or implied, includin g, but not limited to, the suitability of IDT's products for any particular purpose,

an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey an y license under intellectual

property rights of IDT or any third parties.

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be

reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreeme nt by IDT.

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the

property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of

Integrated Device Technology, Inc. All rights reserved.