UM1059

Overview

DocID018518 Rev 2

3/9

1

Overview

1.1

Safety rules

This set of boards can be connected to mains voltage (220 V/110 V). In the case of

improper use, wrong installation or malfunction, there is a danger of serious personal injury

and damage to property. All operations such as: transport, installation, and commissioning,

as well as maintenance, should be carried out by skilled technical personnel only (national

accident prevention rules must be observed).

Due to the risk of death when this prototype on mains voltage (220 V/110 V) is used,

“skilled technical personnel” only, who are familiar with installation, mounting,

commissioning, and operating with power electronic systems and have the qualifications to

perform these functions, may use this prototype.

1.2

Operating conditions

Table 1: Operating conditions

Condition

Value

Unit

230

50/60 ± 10%

Hz

-40 / +85

°C

1.3

Features



Modularity



Programmability



Supports:



3-phase, 4-wire RSTN, 4-system RSTN (tamper); extra module is needed



3-phase, 4-wire RSTN, 3-system RST



3-phase, 3-wire RST_, 3-system RST_ (tamper)



3-phase, 3-wire RST_, 2-system R_T_ (Aron)



2-phase, 3-wire _STN, 2-system _ST_ (America)



1-phase, 2-wire __TN, 2-system _ST_ (tamper)



1-phase, 2-wire __TN, 1-system __T_



4 LEDs showing:



Power



No load condition



Tamper detection



Reverse current direction



Embedded capacitive power supply



Isolation of current channel