LP6280

Page 4 of 12

LP6280–00

Version 0.1 DEC.-2016 Email: marketing@lowpowersemi.com www.lowpowersemi.com

Preliminary Datasheet

Absolute Maximum Ratings

Note 1



Supply Voltage VIN, VCFLY1

------------------------------------------------------------------ -0.3V to +7V



Enable Voltage VENN, VENP



Positive Output Voltage VOUT, VOP

--------------------------------------------------------- -0.3V to +7V



Negative Output Voltage VON, VCFY2

------------------------------------------------------ +0.3V to -7V



SW Voltage VSW

---------------------------------------------------------------------------------- -0.3V to +7V



SDA,SCL Voltage

--------------------------------------------------------------------------------- -0.3V to +7V



----------------------------------------------- -40°C to +150°C



Operation Ambient Temperature Range

----------------------------------------------------- -40°C to +85°C



Storage Temperature Range

------------------------------------------------------------------- -65°C to +150°C



Maximum Soldering Temperature (at leads, 10sec)

-------------------------------------- +260°C

Note 1. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress

ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of

the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Thermal Information



Thermal Resistance

WLCSP 15-ball (1.4mm x 2.3mm)

WLCSP 15-ball (1.4mm x 2.3mm),

ESD Susceptibility





Note 2.

The Human body model (HBM) is a 100pF capacitor discharged through a 1.5kΩ resistor into each pin. The testing is done

according JEDEC.

Note 3. Machine Model (MM) is a 200pF capacitor discharged through a 500nH inductor with no series resistor into each pin. The testing

is done according JEDEC.