| Electronic Components Datasheet Search |
|
MP8714GLE Datasheet(PDF) 3 Page - Monolithic Power Systems |
|
|
|||||||||||||||||||||||||||||
MP8714GLE Datasheet(HTML) 3 Page - Monolithic Power Systems |
|
3 / 20 page ![]() MP8714 – 17V, 10A, SYNCHRONOUS, STEP-DOWN CONVERTER MP8714 Rev.1.0 www.MonolithicPower.com 3 12/27/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2016 MPS. All Rights Reserved. ABSOLUTE MAXIMUM RATINGS (1) VIN..................................................-0.3V to 19V VSW.................................... -0.6V (-6V for <10ns) to 20V (24V for <10ns) VBST ................................................... VSW + 5.5V All other pins ............................. -0.3V to 5.5V (2) Continuous power dissipation (TA = +25°C) (3) QFN-14 (3mmx4mm)................................. 2.6W Junction temperature ................................150°C Lead temperature .....................................260°C Storage temperature.................. -65°C to 150°C Recommended Operating Conditions (4) Supply voltage (VIN)........................4.5V to 17V Output voltage (VOUT) ........................... 0.6V to VIN x DMAX or 5.5V (5) Operating junction temp. (TJ). .. -40°C to +125°C Thermal Resistance (6) θJA θJC QFN-14 (3mmx4mm)............. 48....... 11... °C/W NOTES: 1) Exceeding these ratings may damage the device. 2) For details of EN/SYNC’s ABS MAX rating, please refer to the Enable/SYNC Control section on page 13. 3) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-to- ambient thermal resistance θJA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation produces an excessive die temperature, causing the regulator to go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 4) The device is not guaranteed to function outside of its operating conditions. 5) The output voltage cannot exceed the 5.5V absolute maximum value at any input condition. 6) Measured on JESD51-7, 4-layer PCB. |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |