Low-Cost, Microprocessor

SGM708

Supervisory Circuit

2

DECEMBER 2017

SG Micro Corp

www.sg-micro.com

PACKAGE/ORDERING INFORMATION

MODEL

RESET

THRESHOLD (V)

PACKAGE

DESCRIPTION

ORDERING

NUMBER

PACKAGE

MARKING

PACKING

OPTION

SGM708

4.65

SOIC-8

SGM708-LYS8G/TR

SGM708-LYS8

Tape and Reel, 2500

4.40

SOIC-8

SGM708-MYS8G/TR

SGM708-MYS8

Tape and Reel, 2500

4.0

SOIC-8

SGM708-JYS8G/TR

SGM708-JYS8

Tape and Reel, 2500

3.08

SOIC-8

SGM708-TYS8G/TR

SGM708-TYS8

Tape and Reel, 2500

2.93

SOIC-8

SGM708-SYS8G/TR

SGM708-SYS8

Tape and Reel, 2500

2.63

SOIC-8

SGM708-RYS8G/TR

SGM708-RYS8

Tape and Reel, 2500

Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen

substances. If you have additional comments or questions, please contact your SGMICRO representative directly.

NOTE: Order number is defined as the follow:

ORDER NUMBER

SGM 708- X Y X G / TR

Package Type

Tape and Reel

S8

SOIC-8

Operating Temperature Range

Y

-40

℃ to +85℃

RESET THRESHOLD

L: 4.65V

M: 4.40V

J: 4.0V

T: 3.08V

S: 2.93V

R: 2.63V

Green product

ABSOLUTE MAXIMUM RATINGS

℃, unless otherwise noted.)

Terminal Voltage (with respect to GND)

GND ..........................................................................20mA

Output Current, (all outputs) .........................................20mA

Operating Temperature Range.......................-40

℃ to +85℃

Junction Temperature.................................................+150

℃

Storage Temperature Range ........................-65

℃ to +150℃

Lead Temperature (Soldering, 10s)............................+260

℃

ESD Susceptibility

HBM.............................................................................4000V

MM.................................................................................300V

OVERSTRESS CAUTION

Stresses beyond those listed may cause permanent damage

to the device. Functional operation of the device at these or

any otherconditions beyond those indicated in the operational

section of the specification is not implied. Exposureto absolute

maximum rating conditions for extended periods may affect

reliability.

ESD SENSITIVITY CAUTION

This integrated circuit can be damaged by ESD if you don’t

pay attention to ESD protection. SGMICRO recommends that

all integrated circuits be handled with appropriate precautions.

Failure to observe proper handling and installation procedures

can cause damage. ESD damage can range from subtle

performance degradation to complete device failure. Precision

integrated circuits may be more susceptible to damage

because very small parametric changes could cause the

device not to meet its published specifications.

DISCLAIMER

SG Micro Corp reserves the right to make any change in

circuit design, specification or other related things if necessary

without notice at any time.