ICL7106,ICL7107,ICL7016S,ISL7107S

LCD/LED Display, A/D Converters

www.artschip.com

1

Features

Guaranteed Zero Reading for 0V input on All Scales

True Polarity Zero for Precise Null Detection

1pA Typical Input Current

True Differential Input and Reference, Direct Display Drive

LCD ICL7106, LED ICL7107

Low Noise-Less Than 15µVp-p

On Chip Clock and Reference

Low Power Dissipation – Typically Less Than 10mW

No Additional Active Circuits Required

Enhanced Display Stability (ICL 7106S, ICL7107S)

Pb-Free Plus Anneal Available (RoHS Compliant)

Description

The Intersil ICL7106 and ICL7107 are high performance, low power, 3

decoders, display drivers. Include are seven segment decoders, display drivers, a reference, and a clock. The ICL7106 is

designed to interface with a liquid crystal display (LCD) and includes a multiplexed backplane drive; the ICL7107 will directly drive

and instrument size light emitting diode (LED) display.

The ICL7106 and ICL7107 bring together a combination of high accuracy, versatility, and true economy. It features auto zero to

less than 10µV, zero drift of less than 1µV/℃, input bias current of 10pA (Max), and rollover error of less than one count. True

differential inputs and reference are useful in all systems, but give the designer an uncommon advantage when measuring load

cells, strain gauges and other bridge type transducers. Finally, the true economy of single power supply operation (ICL7106),

enables a high performance panel meter to be built with the addition of only 10 passive components and a display.

Ordering Information

PART NO.

PART MARKING

TEMP. RANGE (℃)

PACKAGE

PKG.DWG. #

ICL7106CPL

ICL7106CPL

0 to 70

40 Ld PDIP

E40.6

ICL7106CPLZ (Note 2)

ICL7106CPLZ

0 to 70

40 Ld PDIP (Pb-free) (Note 3)

E40.6

ICL7106CM44

ICL7106CM44

0 to 70

44 Ld MQFP

Q44.10x10

ICL7106CM44Z(Note 2)

ICL7106CM44Z

0 to 70

44 Ld MQFP (Pb-free)

Q44.10x10

ICL7106CM44ZT (Note 2)

ICL7106CM44Z

0 to 70

44 Ld MQFP Tape and Reel (Pb-free)

Q44.10x10

ICL7107CPL

ICL7107CPL

0 to 70

40 Ld PDIP

E40.6

ICL7107CPLZ (Note 2)

ICL7107CPLZ

0 to 70

40 Ld PDIP (Pb-free) (Note 3)

E40.6

ICL7107RCPL

ICL7107RCPL

0 to 70

40 Ld PDIP (Note 1)

E40.6

ICL7107RCPLZ (Note 2)

ICL7107RCPLZ

0 to 70

40 Ld PDIP (Pb-free) (Notes 1,3)

E40.6

ICL7107SCPL

ICL7107SCPL

0 to 70

40 Ld PDIP (Notes 1,3)

E40.6

ICL7107SCPLZ (Note 2)

ICL7107SCPLZ

0 to 70

40 Ld PDIP (Pd-free) (Notes 1,3)

E40.6

ICL7107CM44

ICL7107CM44

0 to 70

44 Ld MQFP

Q44.10X10

ICL7107CM44T

ICL7107CM44

0 to 70

44 Ld MQFP Tape and Reel

Q44.10X10

ICL7107CM44Z(Note 2)

ICL7107CM44Z

0 to 70

44 Ld MQFP (Pb-free)

Q44.10X10

ICL7107CM44ZT (Note 2)

ICL7107CM44Z

0 to 70

44 Ld MQFP Tape and Reel (Pb-free)

Q44.10X10

NOTES:

1.

“R” indicates device with reversed leads for mounting to PC board underside. “S” indicates enhanced stability.

2.

Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and

100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering

operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free

requirements of IPC/JEDEC J STD-020.

3.

Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder

processing applications.