IMX7ULPCEC datasheet(85/118 Pages) NXP

85 / 118 page

Table 53. ADC electrical specifications (1V≤VREFH<VDD_ANA18MIN and

VADINMAX≤VREFH)1 (continued)

Symbol

Description

Min

Typ2

Max

Unit

Notes

EZS

Zero-scale

error

0.05

LSB

Iin_ext_leak

External

channel

leakage

current

500

EIL

Input leakage

error

RAS * Iin

1. Values in this table are based on design simulations.

2. Typical values assume VDD_ANA_18 = 1.8 V, Temp = 25 °C, fACLK = Max, unless otherwise stated. Typical values

are for reference only, and are not tested in production.

3. This resistance is external to the SoC. To achieve the best results, the analog source resistance must be kept as low

as possible. The results in this data sheet were derived from a system that had < 15 Ω analog source resistance. The

RAS/CAS time constant should be kept to < 1 ns.

4. See Sample time vs. RAS.

5. 1 LSB = (VREFH - VREFL)/2N, N=12

6. ADC conversion clock at max frequency and using linear histogram.

7. Input data used for test was 1 kHz sine wave.

The following figure shows a plot of the ADC sample time versus RAS.

Figure 32. Sample time vs. RAS

Specifications—real-time domain

i.MX 7ULP Applications Processor—Consumer Products, Rev. 0, 06/2019

NXP Semiconductors

IMX7ULPCEC Datasheet(PDF) 85 Page - NXP Semiconductors