STM32WB55 datasheet(42/193 Pages) STMICROELECTRONICS

Part #	STM32WB55

Description	Multiprotocol wireless 32-bit MCU Arm®-based Cortex®-M4 with FPU, Bluetooth® 5.2 and 802.15.4 radio solution

PDF	193 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

42 / 193 page

Functional overview

STM32WB55xx STM32WB35xx

42/193

DS11929 Rev 11

having three independent outputs for the highest flexibility, can generate independent

clocks for the ADC, the RNG and the SAI.



Startup clock: after reset, the microcontroller restarts by default with an internal 4 MHz

clock (MSI). The prescaler ratio and clock source can be changed by the application

program as soon as the code execution starts.



Clock security system (CSS): this feature can be enabled by software. If an HSE

clock failure occurs, the master clock is automatically switched to HSI16 and a software

interrupt is generated if enabled. LSE failure can also be detected and an interrupt

generated.



Clock-out capability:

–

MCO: microcontroller clock output: it outputs one of the internal clocks for

external use by the application. Low frequency clocks (LSIx, LSE) are available

down to Stop 1 low power state.

–

LSCO: low speed clock output: it outputs LSI or LSE in all low-power modes

down to Standby.

Several prescalers allow the user to configure the AHB frequencies, the high speed APB

(APB2) and the low speed APB (APB1) domains. The maximum frequency of the AHB and

the APB domains is 64 MHz.

STM32WB55 Datasheet(PDF) 42 Page - STMicroelectronics