| Electronic Components Datasheet Search |
|
STM32U545NET3QTR Datasheet(PDF) 23 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32U545NET3QTR Datasheet(HTML) 23 Page - STMicroelectronics |
|
23 / 283 page ![]() DS14216 Rev 1 23/283 STM32U545xx Functional overview 88 3.4.1 Flash memory protection The option bytes allow the configuration of flexible protections: • write protection (WRP) to protect areas against erasing and programming. Two areas per bank can be selected with 8-Kbyte granularity. • RDP (readout protection) to protect the whole memory, has four levels of protection available (see Table 3 and Table 4): – Level 0: no readout protection – Level 0.5: available only when TrustZone is enabled All read/write operations (if no write protection is set) from/to the nonsecure flash memory are possible. The debug access to secure area is prohibited. Debug access to nonsecure area remains possible. – Level 1: memory readout protection The flash memory cannot be read from or written to if either the debug features are connected or the boot in RAM or bootloader are selected. If TrustZone is enabled, the nonsecure debug is possible and the boot in SRAM is not possible. Regressions from Level 1 to lower levels can be protected by password authentication. – Level 2: chip readout protection The debug features, the boot in RAM and the bootloader selection are disabled. A secure secret key can be configured in the secure options to allow the regression capability from Level 2 to Level 1. By default (key not configured), this Level 2 selection is irreversible and JTAG/SWD interfaces are disabled. If the secret key was previously configured in lower RDP levels, the device enables the RDP regression from Level 2 to Level 1 after password authentication through JTAG/SWD interface. Note: In order to reach the best protection level, it is recommended to activate TrustZone and to set the RDP Level 2 with password authentication regression enabled. Table 3. Access status versus protection level and execution modes when TZEN = 0 Area RDP level User execution (boot from flash memory) Debug/boot from RAM/ bootloader(1) Read Write Erase Read Write Erase Flash main memory 1 Yes Yes Yes No No No(4) 2 Yes Yes Yes N/A N/A N/A System memory (2) 1 Yes No No Yes No No 2 Yes No No N/A N/A N/A Option bytes(3) 1Yes Yes(4) N/A Yes Yes(4) N/A 2Yes No(5) N/A N/A N/A N/A OTP 1Yes Yes(6) N/A Yes Yes(6) N/A 2Yes Yes(6) N/A N/A N/A N/A |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |