| Electronic Components Datasheet Search |
|
GWIXP425BCT Datasheet(PDF) 82 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
GWIXP425BCT Datasheet(HTML) 82 Page - Intel Corporation |
|
82 / 134 page ![]() Intel® IXP42X Product Line of Network Processors and IXC1100 Control Plane Processor March 2005 Datasheet 82 Document Number: 252479, Revision: 005 5.0 Electrical Specifications 5.1 Absolute Maximum Ratings Warning: Stressing the device beyond the “absolute maximum ratings” may cause permanent damage. These are stress ratings only. Operation beyond the “operating conditions” is not recommended and extended exposure beyond the “operating conditions” may affect device reliability. 5.2 VCCPLL1, VCCPLL2, VCCOSCP, VCCOSC Pin Requirements To reduce voltage-supply noise on the analog sections of the Intel® IXP42X Product Line of Network Processors and IXC1100 Control Plane Processor, the phase-lock loop circuits (VCCPLL1, VCCPLL2) and oscillator circuit (VCCOSCP, VCCOSC) require isolated voltage supplies. The filter circuits for each supply are shown in the following sections. 5.2.1 VCCPLL1 Requirement A parallel combination of a 10-nF capacitor — for bypass — and a 200-nF capacitor — for a first- order filter with a cut-off frequency below 30 MHz — must be connected to the VCCPLL1 pin of the Intel® IXP42X product line and IXC1100 control plane processors. The ground of both capacitors should be connected to the nearest VSS supply pin. Both capacitors should be located less than 0.5 inch away from the VCCPLL1 pin and the associated VSS pin. In order to achieve the 200-nF capacitance, a parallel combination of two 100-nF capacitors may be used as long as the capacitors are placed directly beside each other. Parameter Maximum Rating Ambient Air Temperature (Extended) -40º C to 85º C Ambient Air Temperature (Commercial) 0º C to 70º C Supply Voltage Core -0.3 V to 2.1V Supply Voltage I/O -0.3 V to 3.6V Supply Voltage Oscillator (VCCOSC) -0.3 V to 2.1V Supply Voltage Oscillator (VCCOSCP) -0.3 V to 3.6V Supply Voltage PLL (VCCPLL1) -0.3 V to 2.1V Supply Voltage PLL (VCCPLL2) -0.3 V to 2.1V Voltage On Any I/O Ball -0.3 V to 3.6V Storage Temperature -55o C to 125o C |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |