Data Sheet G18672EJ1V0DS

3

μPC835

ABSOLUTE MAXIMUM RATINGS (TA = 25

°C, unless otherwise specified)

Parameter

Symbol

Ratings

Unit

Voltage between V+ and V−

Note1

V+

− V−

−0.3 to +36

V

Differential Input Voltage

VID

±30

V

Input Voltage

Note2

VI

V−

−0.3 to V+ +0.3

V

Output applied Voltage

Note3

VO

V−

−0.3 to V+ +0.3

V

Total Power Dissipation

PT

350

Note4

mW

Output Short Circuit Duration

Note5

Indefinite

s

Operating Ambient Temperature

TA

−40 to +85

°C

Storage Temperature

Tstg

−55 to +125

°C

Notes 1. Note that reverse connections of the power supply may damage ICs.

2. The input voltage should be allowed to input without damage or destruction. Even during the transition

period of supply voltage, power on/off etc., this specification should be kept. The normal operation will

establish when the both inputs are within the Common Mode Input Voltage Range of electrical

characteristics.

3. This specification is the voltage which should be allowed to supply to the output terminal from external

without damage or destructive. Even during the transition period of supply voltage, power on/off etc., this

specification should be kept. The output voltage of normal operation will be the Output Voltage Swing of

electrical characteristics.

4. This is the value when TA

≤ 59°C during loading a glass epoxy substrate (size: 100 mm x 100 mm,

thickness: 1 mm, filling wiring of 15% of the substrate only on the one side of copper foil). When TA > 59

°C,

conduct a derating in

−5.4 mW/°C. The heat resistance between a junction and ambient air under the same

condition is Rth(J-A) = 187

°C/W.

5. Pay careful attention to the total power dissipation not to exceed the absolute maximum ratings, Note 4.

Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any

parameter. That is, the absolute maximum ratings are rated values at which the product is on the

verge of suffering physical damage, and therefore the product must be used under conditions that

ensure that the absolute maximum ratings are not exceeded.

RECOMMENDED OPERATING CONDITIONS

Parameter

Symbol

MIN.

TYP.

MAX.

Unit

Supply Voltage (Split)

V±

±5

±16

V

Output Current

IO

±6

mA

Capacitive Load (AV =

+1)

CL

4000

Note

pF

Note This is the value during a feedback resistance (Rf = 0

Ω). Since it is prone to oscillate when the value of Rf is

large, a capacitor of about 100 pF should be connected in parallel with Rf.