SST12LP00 datasheet(3/14 Pages) SST

3 / 14 page

Preliminary Specifications

2.4-2.5 GHz Power Amplifier

SST12LP00

S71283-01-000

3/06

ELECTRICAL SPECIFICATIONS

The AC and DC specifications for the power amplifier interface signals. Refer to Table 2 for the DC voltage and current spec-

ifications. Refer to Figure 3 for the RF performance.

Absolute Maximum Stress Ratings (Applied conditions greater than those listed under “Absolute Maximum

Stress Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation

of the device at these conditions or conditions greater than those defined in the operational sections of this data

sheet is not implied. Exposure to absolute maximum stress rating conditions may affect device reliability.)

Supply Voltage at pins 4, 5, and 6 (VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +3.6V

Power-down Control Voltage (PDC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to VCC

Gain Control Voltage (GCTL). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to VCC

Radio Frequency Input Power (RFIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +10 dBm

Operating Temperature (TA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40ºC to +85ºC

Storage Temperature (TSTG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40ºC to +120ºC

Maximum Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150ºC

Surface Mount Solder Reflow Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C for 10 seconds

Operating Range

Range

Ambient Temp

VCC

Industrial

-40°C to +85°C

3.3V

TABLE

2: DC Electrical Characteristics

Symbol

Parameter

Min.

Typ

Max.

Unit

Test Conditions

VCC

Supply Voltage at pins 4, 5, and 6

2.7

3.3

3.6

ICC

Supply Current @ POUT = 23 dBm

115

GCTL

Power Amplifier Gain Control Voltage

0.1

3.0

3.3

IGCTL

Current through GCTL pin

100

µA

PDC

Logic High Voltage

2.6

Logic Low Voltage

0.8

ICQ

Idle Current (GCTL = 3.0V)

T2.3 1283

TABLE

3: AC Electrical Characteristics

Symbol

Parameter

Min.

Typ

Max.

Unit

FL-U

Frequency range

2402

2480

MHz

POUT

Output power

@ PIN = -7 dBm, VCC = 3.3V, GCTL = 3.0V

dBm

Small signal gain

GVAR

Gain variation over band (2400~2485 MHz)

0.2

0.5

T3.2 1283

SST12LP00 Datasheet(PDF) 3 Page - Silicon Storage Technology, Inc

SST12LP00 Datasheet(HTML) 3 Page - Silicon Storage Technology, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Datasheet Download

Link URL