AT83SND2CMP3B datasheet(99/241 Pages) ATMEL

99 / 241 page

4341F–MP3–03/06

AT8xC51SND2C/MP3B

Table 15-27.

PA Operating Mode

Table 15-28.

PA Low Power Mode

15.3

Audio Supplies and Start-up

In operating mode AUDVBAT (supply of the audio power amplifier) must be between 3.2V and

5,5V.

AUDVDD, HSVDD and VDD must be inferior or equal to AUDVBAT.

A typical application is AUDVBAT connected to a battery and AUDVDD, HSVDD and VDD sup-

plied by regulators.

AUDVBAT must be present at the same time or before AUDVDD, HSVDD and VDD.

AUDRST must be active low (0) until the voltages are not etablished and reach the proper

values.

To avoid noise issues, it is recommended to use ceramic decoupling capacitors for each supply

closed to the package. The track of the supplies must be optimized to minimize the resistance

especially on AUDVBAT where all the current from the power amplifier comes from.

Note:

Refer to the application diagram.

0110

0111

1000

-1

1001

-4

1010

-7

1011

-10

1100

-13

1101

-16

1110

-19

1111

-22

APAON

APAPRECH

Operating Mode

Stand-By

Input Capacitors Precharge

Active Mode

Forbidden State

APALP

Power Mode

Low power mode

High power mode

AT83SND2CMP3B Datasheet(PDF) 99 Page - ATMEL Corporation

AT83SND2CMP3B Datasheet(HTML) 99 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL