| Electronic Components Datasheet Search |
|
CS8405A-CS Datasheet(PDF) 22 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS8405A-CS Datasheet(HTML) 22 Page - Cirrus Logic |
|
22 / 37 page ![]() CS8405A 22 DS469F2 8.9 Interrupt 1 Mode MSB (0Ah) and Interrupt 1 Mode LSB (0Bh) The two Interrupt Mode registers form a 2-bit code for each Interrupt Register 1 function. There are three ways to set the INT pin active in accordance with the interrupt condition. In the Rising edge ac- tive mode, the INT pin becomes active on the arrival of the interrupt condition. In the Falling edge ac- tive mode, the INT pin becomes active on the removal of the interrupt condition. In Level active mode, the INT interrupt pin becomes active during the interrupt condition. Be aware that the active level (Ac- tice High or Low) only depends on the INT[1:0] bits. These registers default to 00. 00 - Rising edge active 01 - Falling edge active 10 - Level active 11 - Reserved 8.10 Interrupt 2 Mask (0Ch) The bits of this register serve as a mask for the Interrupt 2 register. If a mask bit is set to 1, the error is unmasked, meaning that its occurrence will affect the INT pin and the status register. If a mask bit is set to 0, the error is masked, meaning that its occurrence will not affect the INT pin or the status register. The bit positions align with the corresponding bits in Interrupt 2 register. This register defaults to 00h. 8.11 Interrupt 2 Mode MSB (0Dh) and Interrupt Mode 2 LSB (0Eh) The two Interrupt Mode registers form a 2-bit code for each Interrupt Register 1 function. There are three ways to set the INT pin active in accordance with the interrupt condition. In the Rising edge ac- tive mode, the INT pin becomes active on the arrival of the interrupt condition. In the Falling edge ac- tive mode, the INT pin becomes active on the removal of the interrupt condition. In Level active mode, the INT interrupt pin becomes active during the interrupt condition. Be aware that the active level (Ac- tive High or Low) only depends on the INT[1:0] bits. These registers default to 00. 00 - Rising edge active 01 - Falling edge active 10 - Level active 11 - Reserved 7 6 5 43210 TSLIP1 0 0 0 0 0 EFTC1 0 TSLIP0 0 0 0 0 0 EFTC0 0 7 6 5 43210 00 0 0 0 EFTUM 0 0 7 6 5 43210 0 0 0 0 0 EFTU1 0 0 0 0 0 0 0 EFTU0 0 0 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |