Specifications are subject to change without notice WM30 96 DS 240914

1

• Class 0.5 (kWh) according to

EN62053-22

• Class C (kWh) according to EN50470-3

• Class 2 (kvarh) according to EN62053-23

• Accuracy ±0.2% RDG (current/voltage)

• Instantaneous variables readout: 4x4 DGT

• Energies readout: 9+1 DGT

• System variables: VLL, VLN, A, VA, W, var, PF, Hz,

Phase-sequence-asymmetry-loss.

• Single phase variables: VLL, VLN, AL, An (calculated),

VA, W, var, PF

• Both system and single phase variables with average

and max calculation

• Harmonic analysis (FFT) up to the 32nd harmonic

(current and voltage)

• Energy measurements (imported/exported): total and

partial kWh and kvarh

• Energy measurements according to ANSI C12.20 CA

0.5, ANSI C12.1 (revenue grade)

• Run hours counter (8+2 DGT)

• Real time clock function

• Application adaptable display and programming

procedure (Easyprog function)

• Universal power supply: 24-48 VDC/AC, 100-240 VDC/AC

• Front dimensions: 96x96 mm

• Front protection degree: IP65, NEMA4X, NEMA12

Product Description

Three-phase

smart

power

analyzer with built-in advanced

configuration system and LCD

data

displaying.

Particularly

recommended

for

the

measurement

of

the

main

electrical variables. WM30 is

based on a modular housing for

panel mounting with IP65 (front)

protection degree. Moreover, the

analyzer can be provided with

digital outputs that can be either

for pulse proportional to the

Energy Management

Smart Modular Power Analyzer

Type WM30 96

• One RS232 and RS485 port (on request)

• Communication protocol: MODBUS-RTU

• MODBUS TCP/IP Ethernet port (on request)

• BACnet-IP over Ethernet port (on request)

• BACnet MS/TP over RS485, BTL approved (on request)

• Ethernet/IP port, ODVA approved (on request)

• Up to 2 digital outputs (pulse, alarm, remote control)

(on request)

• Up to 4 freely configurable virtual alarms

• Up to 2 analogue outputs (+20mA, +10VDC) (on request)

active and reactive energy being

measured

or/and

for

alarm

outputs. The instrument can be

equipped with the following

modules:

RS485/RS232,

Ethernet, BACnet-IP or BACnet

MS/TP communication ports,

pulse

and

alarm

outputs.

Parameters programming and

data reading can be easily

performed

by

means

of

WM3040Soft.

Model

Range code

System

Power Supply

A Outputs

B Outputs

Communication

Option

How to order WM30-96 AV5 3 H R2 A2 S1 XX

Type Selection

Range codes

AV4:

400/690VLL AC

1(2)A

VLN: 160V to 480VLN

VLL: 277V to 830VLL

AV5:

400/690VLL AC

5(6)A

VLN: 160V to 480VLN

VLL: 277V to 830VLL

AV6:

100/208VLL AC

5(6)A

VLN: 40V to 144VLN

VLL: 70V to 250VLL

AV7:

100/208VLL AC

1(2)A

VLN: 40V to 144VLN

VLL: 70V to 250VLL

Options

XX:

none

System

3:

balanced and

unbalanced load:

3-phase, 4-wire;

3-phase, 3-wire;

2-phase, 3-wire;

1-phase, 2-wire

A Outputs

XX:

none

O2:

Dual channel static

output

R2:

Dual channel relay

output

Power supply

H:

100-240 +/-10% (90

to 255) VDC/AC

(50/60 Hz)

L:

24-48 +/-15% (20 to

55) VDC/AC

(50/60 Hz)

B Outputs

XX:

none

A2:

Dual channel 20mA

DC output

V2:

Dual channel 10V

DC output

Communication

XX:

none

S1:

RS485/RS232 port

E2:

Ethernet / Internet

port

B1:

BACnet (IP) over

Ethernet

B3:

BACnet (MS/TP)

over RS485

E6:

Ethernet/IP port