STM32F205RFT6 datasheet(172/184 Pages) STMICROELECTRONICS

172 / 184 page

Revision history

STM32F20xxx

172/184

DocID15818 Rev 15

13-Jul-2010

(continued)

Added USB OTG_FS features in Section 3.28: Universal serial bus on-

the-go full-speed (OTG_FS).

Updated VCAP_1 and VCAP_2 capacitor value to 2.2 µF in Figure 19:

Power supply scheme.

Removed DAC, modified ADC limitations, and updated I/O

compensation for 1.8 to 2.1 V range in Table 15: Limitations depending

on the operating power supply range.

Added VBORL, VBORM, VBORH and IRUSH in Table 19: Embedded reset

and power control block characteristics.

Removed table Typical current consumption in Sleep mode with Flash

memory in Deep power down mode. Merged typical and maximum

current consumption sections and added Table 21: Typical and

maximum current consumption in Run mode, code with data processing

running from Flash memory (ART accelerator disabled), Table 20:

Typical and maximum current consumption in Run mode, code with data

processing running from Flash memory (ART accelerator enabled) or

RAM, Table 22: Typical and maximum current consumption in Sleep

mode, Table 23: Typical and maximum current consumptions in Stop

mode, Table 24: Typical and maximum current consumptions in Standby

mode, and Table 25: Typical and maximum current consumptions in

VBAT mode.

Update Table 34: Main PLL characteristics and added Section 6.3.11:

PLL spread spectrum clock generation (SSCG) characteristics.

Added Note 8 for CIO in Table 48: I/O AC characteristics.

Updated Section 6.3.18: TIM timer characteristics.

Added TNRST_OUT in Table 49: NRST pin characteristics.

Updated Table 52: I2C characteristics.

Removed 8-bit data in and data out waveforms from Figure 48: ULPI

timing diagram.

Removed note related to ADC calibration in Table 67. Section 6.3.20:

12-bit ADC characteristics: ADC characteristics tables merged into one

single table; tables ADC conversion time and ADC accuracy removed.

Updated Table 68: DAC characteristics.

Updated Section 6.3.22: Temperature sensor characteristics and

Section 6.3.23: VBAT monitoring characteristics.

Update Section 6.3.26: Camera interface (DCMI) timing specifications.

Added Section 6.3.27: SD/SDIO MMC card host interface (SDIO)

characteristics, and Section 6.3.28: RTC characteristics.

Added Section 7.7: Thermal characteristics. Updated Table 91:

LQFP176 - Low profile quad flat package 24 × 24 × 1.4 mm package

mechanical data and Figure 86: LQFP176 - Low profile quad flat

package 24 × 24 × 1.4 mm, package outline.

Changed tape and reel code to TX in Table 96: Ordering information

scheme.

Added Table 101: Main applications versus package for STM32F2xxx

microcontrollers. Updated figures in Appendix A.2: USB OTG full speed

(FS) interface solutions and A.3: USB OTG high speed (HS) interface

solutions. Updated Figure 94: Audio player solution using PLL, PLLI2S,

USB and 1 crystal and Figure 95: Audio PLL (PLLI2S) providing

accurate I2S clock.

Table 97. Document revision history (continued)

Date

Revision

Changes

STM32F205RFT6 Datasheet(PDF) 172 Page - STMicroelectronics

STM32F205RFT6 Datasheet(HTML) 172 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL