STM32F205RFT6 datasheet(173/184 Pages) STMICROELECTRONICS

173 / 184 page

DocID15818 Rev 15

173/184

STM32F20xxx

Revision history

183

25-Nov-2010

Update I/Os in Section : Features.

Added WLCSP64+2 package. Added note 1 related to LQFP176 on

cover page.

Added trademark for

ART accelerator. Updated Section 3.2: Adaptive

real-time memory accelerator (ART Accelerator™).

Updated Figure 5: Multi-AHB matrix.

Added case of BOR inactivation using IRROFF on WLCSP devices in

Section 3.15: Power supply supervisor.

Reworked Section 3.16: Voltage regulator to clarify regulator off modes.

Renamed PDROFF, IRROFF in the whole document.

Added Section 3.19: VBAT operation.

Updated LIN and IrDA features for UART4/5 in Table 6: USART feature

comparison.

Table 8: STM32F20x pin and ball definitions: Modified VDD_3 pin, and

added note related to the FSMC_NL pin; renamed BYPASS-REG

REGOFF, and add IRROFF pin; renamed USART4/5 UART4/5.

USART4 pins renamed UART4.

Changed VSS_SA to VSS, and VDD_SA pin reserved for future use.

Updated maximum HSE crystal frequency to 26 MHz.

Section 6.2: Absolute maximum ratings: Updated VIN minimum and

maximum values and note related to five-volt tolerant inputs in Table 11:

Voltage characteristics. Updated IINJ(PIN) maximum values and related

notes in Table 12: Current characteristics.

Updated VDDA minimum value in Table 14: General operating

conditions.

Added Note 2 and updated Maximum CPU frequency in Table 15:

Limitations depending on the operating power supply range, and added

Figure 21: Number of wait states versus fCPU and VDD range.

Added brownout level 1, 2, and 3 thresholds in Table 19: Embedded

reset and power control block characteristics.

Changed fOSC_IN maximum value in Table 30: HSE 4-26 MHz oscillator

characteristics.

Changed fPLL_IN maximum value in Table 34: Main PLL characteristics,

and updated jitter parameters in Table 35: PLLI2S (audio PLL)

characteristics.

Section 6.3.16: I/O port characteristics: updated VIH and VIL in Table 48:

I/O AC characteristics.

Added Note 1 below Table 47: Output voltage characteristics.

Updated RPD and RPU parameter description in Table 57: USB OTG FS

DC electrical characteristics.

Updated VREF+ minimum value in Table 66: ADC characteristics.

Updated Table 71: Embedded internal reference voltage.

Removed Ethernet and USB2 for 64-pin devices in Table 101: Main

applications versus package for STM32F2xxx microcontrollers.

Added A.2: USB OTG full speed (FS) interface solutions, removed

“OTG FS connection with external PHY” figure, updated Figure 87,

Figure 88, and Figure 90 to add STULPI01B.

Table 97. Document revision history (continued)

Date

Revision

Changes

STM32F205RFT6 Datasheet(PDF) 173 Page - STMicroelectronics

STM32F205RFT6 Datasheet(HTML) 173 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL