STM32F205RFT6 datasheet(177/184 Pages) STMICROELECTRONICS

177 / 184 page

DocID15818 Rev 15

177/184

STM32F20xxx

Revision history

183

14-Jun-2011

Added SDIO in Table 2: STM32F205xx features and peripheral counts.

Updated VIN for 5V tolerant pins in Table 11: Voltage characteristics.

Updated jitter parameters description in Table 34: Main PLL

characteristics.

Remove jitter values for system clock in Table 35: PLLI2S (audio PLL)

characteristics.

Updated Table 42: EMI characteristics.

Update Note 2 in Table 52: I2C characteristics.

Updated Avg_Slope typical value and TS_temp minimum value in

Table 69: Temperature sensor characteristics.

Updated TS_vbat minimum value in Table 70: VBAT monitoring

characteristics.

Updated TS_vrefint minimum value in Table 71: Embedded internal

reference voltage.

Added Software option in Section 8: Ordering information.

In Table 101: Main applications versus package for STM32F2xxx

microcontrollers, renamed USB1 and USB2, USB OTG FS and USB

OTG HS, respectively; and removed USB OTG FS and camera

interface for 64-pin package; added USB OTG HS on 64-pin package;

added Note 1 and Note 2.

20-Dec-2011

Updated SDIO register addresses in Figure 16: Memory map.

Updated Figure 3: Compatible board design between STM32F10x and

STM32F2xx for LQFP144 package, Figure 2: Compatible board design

between STM32F10x and STM32F2xx for LQFP100 package, Figure 1:

Compatible board design between STM32F10x and STM32F2xx for

LQFP64 package, and added Figure 4: Compatible board design

between STM32F10xx and STM32F2xx for LQFP176 package.

Updated Section 3.3: Memory protection unit.

Updated Section 3.6: Embedded SRAM.

Updated Section 3.28: Universal serial bus on-the-go full-speed

(OTG_FS) to remove external FS OTG PHY support.

In Table 8: STM32F20x pin and ball definitions: changed SPI2_MCK

and SPI3_MCK to I2S2_MCK and I2S3_MCK, respectively. Added ETH

_RMII_TX_EN alternate function to PG11. Added EVENTOUT in the list

of alternate functions for I/O pin/balls. Removed OTG_FS_SDA,

OTG_FS_SCL and OTG_FS_INTN alternate functions.

In Table 10: Alternate function mapping: changed I2S3_SCK to

I2S3_MCK for PC7/AF6, added FSMC_NCE3 for PG9, FSMC_NE3 for

PG10, and FSMC_NCE2 for PD7. Removed OTG_FS_SDA,

OTG_FS_SCL and OTG_FS_INTN alternate functions. Changed

I2S3_SCK into I2S3_MCK for PC7/AF6. Updated peripherals

corresponding to AF12.

Removed CEXT and ESR from Table 14: General operating conditions.

Table 97. Document revision history (continued)

Date

Revision

Changes

STM32F205RFT6 Datasheet(PDF) 177 Page - STMicroelectronics

STM32F205RFT6 Datasheet(HTML) 177 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL