int potPin = 0;

// connect a pot to this pin.

void setup()

{

for( int i =0; i < NBR_SERVOS; i++)

Servos[i].attach( FIRST_SERVO_PIN +i, 800, 2200);

}

void loop()

{

pos = analogRead(potPin);

// read a value from 0 to 1023

for( int i =0; i <NBR_SERVOS; i++)

Servos[i].write( map(pos, 0,1023,0,180));

delay(15);

}

It can be used as a standard mini Arduino board and can control up to 12 servos.For more

information, check the Arduino library. http://arduino.cc/playground/Code/MegaServo

 

 

 

 

 

 

 

 

 

 

 

Powered By DFRobot © 2008-2017